Alternatives and similar repositories for motoHUDini:

Users that are interested in motoHUDini are comparing it to the libraries listed below

• pierremolinaro / acan-esp32
  An ESP32 CAN 2.0B library
  ☆50Updated this week
• megadrifter / Arduino_STM32
  Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.6.5 including LeafLabs Maple and other generic STM32F103 boards. …
  ☆13Updated 6 years ago
• nhatuan84 / esp32-can-protocol-demo
  ☆92Updated 7 years ago
• exothink / eXoCAN
  stm32duino CAN Library for the STM32F103 aka Blue Pill
  ☆81Updated last year
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆101Updated 3 years ago
• coniferconifer / ESP32-ECU-emulator
  ECU emulator by ESP32 with TJA1050 for OBD2 print test
  ☆46Updated 8 months ago
• nopnop2002 / esp-idf-CANBus-Monitor
  Monitor Canbus traffic
  ☆122Updated 7 months ago
• karlyamashita / CAN-X
  CAN bus analyzer software
  ☆24Updated 2 years ago
• pawelka / esp32_can
  Arduino ESP32 library supporting the on-chip CAN module
  ☆12Updated 2 years ago
• p1ne / arduino-can-bus-library
  CAN Bus Shield - MCP2515&MCP2551
  ☆12Updated 7 years ago
• keepiru / dash-kitten
  Arduino-powered digital dashboards... For kittens!
  ☆12Updated 8 years ago
• PowerBroker2 / ArduHUD
  Arduino/ELM327-based project to create a car head's up display
  ☆44Updated 2 years ago
• BennehBoy / LRDuinoTD5
  In car multi gauge system - STM32, SSD1306, MAX31856, L9637D, TD5 ECU
  ☆24Updated last year
• bouletmarc / Arduino_Honda_OBD1_BM-Duino
  This is an Arduino Honda OBD1 ECU datalogger from CN2, also able to ignition cut
  ☆14Updated 8 years ago
• abhishekoct18 / allpro
  Open-source ELM327 OBD adapter
  ☆35Updated 8 years ago
• collin80 / can_common
  Common structures and functionality for CAN libraries
  ☆122Updated 11 months ago
• collin80 / FirmwareReceiver
  ☆14Updated 8 years ago
• uhi22 / wifican
  Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3
  ☆23Updated 4 months ago
• KruFFT / CAN-Sniffer
  CAN bus sniffer (Arduino/ESP side)
  ☆37Updated 4 months ago
• kilohercas / STM32F103_LINBUS
  Example code to use LINBUS
  ☆23Updated 4 years ago
• atc1441 / arduino-mcp2515
  Arduino MCP2515 CAN interface library
  ☆37Updated 4 years ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆36Updated 10 months ago
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆79Updated 5 years ago
• irvined1982 / arduino-ELM327
  ELM327 Library for Arduino
  ☆70Updated 5 years ago
• gooflophaze / MSCan_Gauge
  Megasquirt Gauge based on Arduino Mega, MCP2515 Transceiver, OLED Screen and Neopixel LED Ring.
  ☆16Updated 2 years ago
• martinhol221 / ISO14230-4-KWP
  Reading the K-line of the bus according to ISO 14230-4 KWP 10.4 Kbaud
  ☆24Updated 5 years ago
• NewTec-GmbH / esp32-can-iot
  A ESP32 based interface between CAN-bus and IoT environments.
  ☆39Updated last year
• skpang / Arduino_CAN-Bus_ECU_reader
  ☆46Updated 8 years ago
• mxcd / CANnon
  A versatile CAN bootloader for the STM32 and friends
  ☆17Updated 7 years ago
• MWP / megasquirt-dash-display
  Dash display project for Megasquirt ECUs based on ESP32 and EVE2
  ☆31Updated 5 years ago