Candas1 / Hoverboard-Web-Serial-ControlLinks
☆26Updated last year
Alternatives and similar repositories for Hoverboard-Web-Serial-Control
Users that are interested in Hoverboard-Web-Serial-Control are comparing it to the libraries listed below
Sorting:
- with different defines_2-x.h for different board layouts :-) Compiles with Keil version 6☆119Updated this week
- Hoverboard sideboard hack for STM32 boards☆59Updated 3 years ago
- Hoverboard Hack Firmware Generation 2 for the Hoverboard with the two Mainboards instead of the Sensorboards (See Readme.md).☆175Updated 4 years ago
- Hoverboard sideboard hack for GD32 boards☆128Updated last year
- ☆37Updated 3 years ago
- CHEAP LAWNMOWER ROBOT USING A HOVERBOARD (Hacked Firmware)☆24Updated 4 years ago
- M365_MC_WB☆144Updated last year
- With Field Oriented Control (FOC)☆18Updated 4 years ago
- Hoverboard motor controllers controlled serially via esp32 and UART☆13Updated 3 years ago
- EV motor controller with space to have customizable electronics and be easy to repair and build.☆38Updated 2 years ago
- With SINUSOIDAL BLDC control. Offers much quieter and smoother motor operation.☆47Updated 3 years ago
- A200S ESC - Based upon the VESC®*-Project☆53Updated 6 years ago
- With Field Oriented Control (FOC)☆67Updated last year
- ☆25Updated 4 months ago
- BLDC Motor Controller based on the VESC 4.12 hardware☆74Updated 5 years ago
- FOC_ESC hardware design repository☆112Updated 6 years ago
- Thrust stand data logger utilising the dshot600 protocol and ESC telemetry.☆94Updated 3 years ago
- ☆83Updated last year
- With Field Oriented Control (FOC)☆13Updated 2 years ago
- Generate a PPM Signal with an Arduino☆65Updated last year
- Radio control of the RC using the ESP-NOW protocol.☆21Updated 8 months ago
- Our own dual BLDC Motorcontroller☆17Updated 2 months ago
- OpenSource Hoverboard firmware based on Niklas Fauth's one https://github.com/NiklasFauth/hoverboard-firmware-hack☆192Updated 5 years ago
- My hardware design for 433MHz Ultimate LRS modules.☆22Updated 6 years ago
- Custom PCB design and firmware, which serve as a ESC or BLDC controller, to drive brushless BLDC motors using my own control algorithms.☆78Updated 3 years ago
- MESC, Molony ESC, STM32F303 based FOC+BLDC ready, HALL, Encoder, Sensorless, single sides, 2 layer, ~90A @48V☆48Updated 4 years ago
- ESC - Electronic Speed Controller for BLDC Motors.☆47Updated last year
- An interrupt based PPM signal reader for Arduino☆79Updated 4 years ago
- converts elrs CRSF serial signals into PWM pulses on output pins☆97Updated last year
- A CAN Bus library for Arduino and other platforms☆12Updated last year