Alternatives and similar repositories for allpro

Users that are interested in allpro are comparing it to the libraries listed below

• darkspr1te / elm327_clone
  ELM327 firmware for pic18f25k80 chip from china clone OBD2 diag boxes
  ☆43Updated 8 years ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆82Updated 5 years ago
• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆67Updated 8 months ago
• collin80 / can_common
  Common structures and functionality for CAN libraries
  ☆144Updated last year
• muki01 / OBD2_K-line_Reader
  OBD2 K-line Reader (ISO9141 and ISO14230) with microcontrollers like ESP32, Arduino
  ☆168Updated last week
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆39Updated last year
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆105Updated 2 weeks ago
• autowp / CANreader
  Android CAN client
  ☆67Updated 8 years ago
• coniferconifer / ESP32-ECU-emulator
  ECU emulator by ESP32 with TJA1050 for OBD2 print test
  ☆63Updated last year
• nopnop2002 / esp-idf-CANBus-Monitor
  Monitor Canbus traffic
  ☆133Updated 8 months ago
• qnx425 / ELM327SLCAN
  ELM327 based vehicle's CAN bus sniffer
  ☆70Updated 7 years ago
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆122Updated last year
• oelprinz-org / BL49SP
  Wideband Lambda Controller with Bosch CJ125
  ☆45Updated 2 years ago
• rusefi / hw_microRusEfi
  microRusEfi board for rusEfi ECU
  ☆85Updated 4 months ago
• DieselDuz42 / Arduino-CAN-bus-SD-logger
  Arduino script to log CAN bus information to SD card. Mainly focused on J1939.
  ☆25Updated 5 years ago
• rusefi / rusefi_documentation
  User documentation for rusEFI engine control unit
  ☆48Updated this week
• atc1441 / arduino-mcp2515
  Arduino MCP2515 CAN interface library
  ☆40Updated 5 years ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆57Updated 4 years ago
• NewTec-GmbH / esp32-can-iot
  A ESP32 based interface between CAN-bus and IoT environments.
  ☆46Updated 2 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆59Updated 4 years ago
• Autohome2 / dxControl-Gears
  ☆25Updated 8 years ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆42Updated 2 years ago
• kkuchera / canalyze-fw
  Firmware for the CANalyze hardware.
  ☆71Updated 2 years ago
• fpoussin / MotoLink
  K-line/Serial/CAN interface and fuel mapper for motorcycles.
  ☆94Updated 5 years ago
• MagnusThome / esp32_obd2
  An Arduino library for reading OBD-II data from your car over CAN bus
  ☆57Updated 2 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆78Updated 2 months ago
• kolyandex / CAN-to-USB-lawicel-for-stm32
  CAN to USB adapter using Lawicel/Canhacker protocol.
  ☆22Updated 6 years ago
• pierremolinaro / acan-esp32
  An ESP32 CAN 2.0B library
  ☆74Updated 7 months ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆88Updated 11 years ago
• Longan-Labs / Arduino_CAN_BUS_MCP2515
  Arduino CAN Bus library, MCP2515/MCP2551
  ☆159Updated 2 years ago