Alternatives and similar repositories for CANdiy-Shield

Users that are interested in CANdiy-Shield are comparing it to the libraries listed below

• collin80 / DS2480B
  OneWire library custom engineered for JLD505 boards with DS2480B chips
  ☆11Updated 10 years ago
• tumanako / tumanako-inverter-fw-motorControl
  ☆23Updated 6 years ago
• openxc / openlpc-USB_Bootloader
  LPC1759 USB bootloader based on a Mass Storage Device
  ☆13Updated 9 years ago
• linux-can / can-misc
  Linux-CAN / SocketCAN miscellaneous stuff
  ☆25Updated last year
• krumboeck / usb2can_firmware
  ☆17Updated 9 years ago
• CANBus-Triple / CANBus-Triple-Hardware
  Eagle CAD files for CANBus Triple Hardware
  ☆56Updated 8 years ago
• openmv / openmv-swd
  Serial Wire Debugger Programmer
  ☆11Updated 2 years ago
• Hyvok / ARM-induction-heater-controller
  ☆12Updated 10 years ago
• sebi2k1 / openCanSuite
  ☆31Updated 8 years ago
• vedderb / contiki
  Read more about this at
  ☆20Updated 11 years ago
• normaldotcom / CANard
  A fork of CANard with various tweaks and improvements implemented
  ☆49Updated 6 years ago
• cvra / CAN-USB-dongle-fw
  slcan firmware for the CVRA CAN to USB dongle
  ☆37Updated 4 years ago
• circuitvalley / Solar_LED_MPPT_Charger
  Solar MPPT Charger Implemented with BQ24650 MPS430 MCU
  ☆19Updated 8 years ago
• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆63Updated 3 months ago
• LibreSolar / rpi-can
  CAN bus interface for Raspberry Pi (Zero W)
  ☆24Updated 7 years ago
• sparkfun / OBD-II_UART
  A board that provides a serial interface with a vehicle's OBD-II bus.
  ☆82Updated 5 years ago
• thienhaiblue / ampm_car_tracker
  A tracking device using Ublox GSM and GPS solution,
  ☆21Updated 9 years ago
• LaosLaser / Firmware
  Embedded software (firmware) for the laser system and components, including configuration files
  ☆27Updated last year
• fville / CANAnalyzer
  CAN bus analyzer written in python+wxPython. Works with Lawicel CANUSB device.
  ☆10Updated 11 years ago
• vedderb / bldc-logger
  A file and video-overlay logger for my BLDC motor controller
  ☆51Updated 9 years ago
• sparkfun / CAN-Bus_Shield
  ☆83Updated last year
• labnation / decoders
  Protocol decoders for the SmartScope
  ☆35Updated 6 years ago
• mikestir / tinyhan
  A lightweight radio protocol for home automation applications
  ☆32Updated 9 years ago
• damienmaguire / Inverter
  My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.
  ☆12Updated 8 years ago
• EmbedME / USBtinViewer
  Simple GUI for USBtin (USB to CAN interface)
  ☆42Updated 5 years ago
• Ralim / OpenMPPT
  Open Source MPPT for Lithium Batteries. Based on TI controller
  ☆16Updated 8 years ago
• fabiobaltieri / open-usb-can
  Open Source USB to CANBUS interface
  ☆109Updated last year
• majbthrd / SAMC21demoCAN
  CAN and CAN-FD demonstration code for SAMC21-XPRO
  ☆14Updated 8 years ago
• HubertD / socketcan-mqtt-bridge
  python script to bridge between a mqtt server (e.g. mosquitto) and a socketcan device
  ☆13Updated 9 years ago
• EmcraftSystems / linux-upstream
  Emcraft BSPs ported to mainline Linux tree, versions 4.2, 4.5, 4.9.51 and 4.9.88
  ☆24Updated 2 years ago