ttlappalainen / NMEA2000_TeensyxLinks
Teensy 3.1/3.2/3.5/3.6/4.0/4.1 boards CAN driver library for the NMEA2000 library
☆12Updated last year
Alternatives and similar repositories for NMEA2000_Teensyx
Users that are interested in NMEA2000_Teensyx are comparing it to the libraries listed below
Sorting:
- CAN Bus Shield - MCP2515&MCP2551☆14Updated 4 years ago
- Inherited object for use NMEA2000 with ESP32 boards☆80Updated 11 months ago
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 4 years ago
- Material für den NMEA2000-Workshop.☆42Updated last week
- Sailor Hat for ESP32 hardware☆47Updated 8 months ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆32Updated last year
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆40Updated 3 years ago
- Plugin to convert Signal K to NMEA2000☆23Updated this week
- Standalone arduino-based Mass Air Flow (MAF) meter, based on the SAAB t7 sensor☆12Updated 7 years ago
- Go client to read NMEA 2000 messages from canbus interfaces or usb devices☆15Updated last year
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆61Updated 3 years ago
- Open-source electronics for your boat☆48Updated 5 years ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆80Updated 3 years ago
- NMEA 2000 to Signal K transformer☆28Updated this week
- Hardware circuit diagram for interfacing to the Webasto WBUS interface from a PC/Arduino☆24Updated 5 years ago
- SWCAN add-on board for Open Vehicle Monitoring System☆31Updated 5 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆55Updated 4 years ago
- How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries☆20Updated 4 years ago
- IFCT - Improved FlexCAN Teensy Library☆11Updated 6 years ago
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆36Updated 2 years ago
- NMEA2000 CLI parser for Actisense-Serial NGT-1 Gateway and saving data to InfluxDB via UDP and publishing it with MQTT☆10Updated 5 years ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 4 years ago
- Arduino Library for CAN Bed☆26Updated 4 years ago
- ☆41Updated 5 years ago
- nmea2000 gateway with ESP32☆77Updated 2 months ago
- A ESP32 based interface between CAN-bus and IoT environments.☆41Updated 2 years ago
- A display for the M5Stack connecting via JSON to the NMEA 2000 WiFi Gateway.☆16Updated 4 years ago
- CANbus to USB bridge using esp32☆30Updated this week
- Arduino library for CAN on Teensy 3.1, 3.2, 3.5 and 3.6☆78Updated 6 years ago
- ESP32 S3 CAN bus TWAI Arduino Example☆11Updated 2 years ago