thomask77 / nucular-keyboardLinks
USB Keyboard Adapter for old ThinkPad keyboards
☆39Updated 8 years ago
Alternatives and similar repositories for nucular-keyboard
Users that are interested in nucular-keyboard are comparing it to the libraries listed below
Sorting:
- Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…☆58Updated 12 years ago
- PCBs designed by Icenowy☆27Updated 4 years ago
- Using an Arduino Micro as a USB adapter for ThinkPad T60 keyboard with TrackPoint support. Supports different keyboards from the ThinkPad…☆135Updated 11 years ago
- Reimplementation of serprog-duino based on the original flashrom serprog interfacing code (now libfrser).☆75Updated 2 years ago
- eMMC WFBGA153 to microSD card adapter PCB☆72Updated last year
- Ultra low cost HDMI-USB Video Acquisition (HDMI Capture Card) based on MS2109☆58Updated 3 years ago
- USB-OTG Keyboard on STM32F4-Discovery☆33Updated 11 years ago
- KiCad library and templates for creating designs with Mini-PCI-express cards (both the cards and sockets).☆107Updated 7 years ago
- A simple M.2 NVMe to miniPCIe adapter☆30Updated last year
- ice40 FPGA eink controller☆117Updated 6 years ago
- Five port fast ethernet managed switch☆56Updated 9 years ago
- USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware☆30Updated 6 years ago
- USB Power Delivery library☆88Updated 7 years ago
- NGFF (M.2) edge connector footprints and symbols for KiCAD☆41Updated 5 years ago
- Dev board for USB-C and Power Delivery☆147Updated 5 years ago
- A libusb based programming tool for 24Cxx serial EEPROMs using the WinChipHead CH341A IC☆172Updated last year
- Arduino on a mini-PCIe card☆100Updated 10 years ago
- 1kB TFTP Ethernet bootloader for ATmega328P and ENC28J60☆55Updated 8 years ago
- Library routines for creating firmware for the Cypress FX2 (CY7C68013 and variants) with SDCC☆148Updated last year
- Community contributed code (ports, drivers, etc).☆144Updated 2 weeks ago
- KiCad PCBNEW plugin that lets you add wires between pads on a PCB, delete them, and swap wires between pads.☆88Updated 11 months ago
- A breakout board for the FUSB302 USB Power Delivery PHY☆110Updated 6 years ago
- Drive an old laptop display from an 8-bit AVR microcontroller☆20Updated 10 years ago
- ☆43Updated last year
- USB-PD charger as a programmable power supply.☆75Updated 4 years ago
- ☆33Updated 10 years ago
- DFU bootloader for STM32F103, for use with any F103 code and target☆31Updated 9 years ago
- ☆92Updated 6 years ago
- An open hardware embedded SBC for the NXP i.MX8M Mini application processor☆128Updated 3 months ago
- Andy's Workshop Reflow Oven Controller☆33Updated 8 years ago