mitxela / smscLinks
☆26Updated 2 years ago
Alternatives and similar repositories for smsc
Users that are interested in smsc are comparing it to the libraries listed below
Sorting:
- A cheap 2-channel USB audio interface based on a Pi Pico board☆29Updated 7 months ago
- LED backlight replacement for the Palm IIIc☆20Updated 3 years ago
- Generates a 2D touchpad / trackpad XY pattern and creates a fully routed PCB out of it☆56Updated 10 months ago
- Postal Pico ROM Reader☆32Updated 2 years ago
- A 555 timer simulator running on the ATTiny85 :)☆63Updated 4 years ago
- Reviing the TI92 calculator with a new KICAD PCB and a new 4 inch display☆43Updated 2 years ago
- Automatically draw a KiCad schematic for a circuit prototyped on a breadboard.☆26Updated 4 years ago
- ☆66Updated 4 years ago
- ☆37Updated 9 months ago
- Audio out with an FTDI UART cable☆43Updated 4 years ago
- 12-Button IR Remote Control☆46Updated 3 years ago
- ☆24Updated last year
- A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-…☆20Updated 5 years ago
- A Serial-To-Parallel data transmission device, built with the ATMEGA328.☆13Updated 6 years ago
- A Breadstick development board based around the Raspberry Pi Foundation's RP2040 microcontroller.☆16Updated last year
- ☆23Updated last year
- WART Audio: Use UARTs to play audio☆37Updated 4 years ago
- Teensy 4.1 based micro computer☆40Updated 2 years ago
- Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector disp…☆67Updated 5 years ago
- A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources☆37Updated 9 months ago
- ☆40Updated 5 years ago
- LED Ring Ligh for Potentiometer - Pimp My Potentiometer!☆30Updated 2 years ago
- Uses spectral analysis to convert sounds/music from WAV format into VGM format suitable for an OPL3 synthesizer.☆29Updated last year
- Hardware/Firmware/CAD files for a DIY HitClips cartridge☆15Updated 4 years ago
- Arduino library that supports CF Cards and PATA drives☆38Updated 5 years ago
- PIO based capacitive touch for the RP2040☆72Updated 8 months ago
- Use the ch32v003 as a usb pd controller☆48Updated last year
- Attiny85-based device to enable and disable write-protection on any SD card☆24Updated 3 years ago
- CH340C based ESP32 programmer module pcb with auto- programming & reset, sponsored by PCBWay.☆40Updated 11 months ago
- USB and S/PDIF audio DAC using the Raspberry Pi Pico (RP2040)☆58Updated 3 months ago