Alternatives and similar repositories for NGFF

Users that are interested in NGFF are comparing it to the libraries listed below

• circuitvalley / Intel_FPGA_Board_98Y2610
  This Repo has Files related to reverse engineering of IBM 98Y2610 Intel Cyclone IV
  ☆62Updated 7 months ago
• lonehog / JTAGprobe
  Firmware for Raspberry Pico to work as JTAG debugger using OpenOCD
  ☆54Updated 4 months ago
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆42Updated last year
• kbeckmann / uart-audio
  Audio out with an FTDI UART cable
  ☆43Updated 4 years ago
• antmicro / m2-pcie-adapter
  Adapter card exposing M.2 (key-M) signals on PCIe x4 card edge socket.
  ☆40Updated last year
• a-little-wifi / ASM2464PD-test
  Messing around with ASM2464PD symbol and footprint
  ☆26Updated 9 months ago
• notro / pico-usb-io-board
  Raspberry Pi Pico USB I/O Board
  ☆79Updated 2 years ago
• tvlad1234 / Pico-10BASE-T-Library
  Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet
  ☆10Updated 2 years ago
• zeldin / fx3lafw
  Blob-free logic analyzer firmware for FX3
  ☆82Updated last year
• arturo182 / awesome-pmod
  A curated list of Open Source PMOD boards
  ☆44Updated 5 years ago
• CRImier / AltmodeFriend
  Altmode Friend code, STEP and other files
  ☆32Updated 9 months ago
• regymm / muzy
  2-layer FPGA development board with ZYNQ 7010/7020 400-pin BGA.
  ☆19Updated 9 months ago
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated last year
• esden / bitmagic
  Open Source Logic Analyzers and data Syphons
  ☆80Updated 2 years ago
• Tengo10 / pinout-overview
  A simple Python tool to create pinout overviews of ICs.
  ☆33Updated last year
• pergola-fpga / pergola
  Low-cost ECP5 FPGA development board
  ☆77Updated 4 years ago
• gsteiert / pico-dirty-blaster-workshop
  Files and documentation for Pico-Dirty-Blaster Workshop
  ☆20Updated 3 weeks ago
• emeb / icehat
  ☆29Updated 8 years ago
• hydrausb3 / hydrausb3_hw
  HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, …
  ☆33Updated last year
• mkvenkit / humble_ice
  A low cost FPGA development board based on Lattice iCE40UP5k and Raspberry Pi RP2040.
  ☆45Updated 2 years ago
• amaranth-farm / ch569-hspi-fpga
  Gateware to communicate with the high speed parallel interface (HSPI) of the CH569 with a FPGA
  ☆32Updated 2 years ago
• m1geo / Pi5_PCIe
  A crude reverse engineering of the Pi5 PCIe connector & potential breakout boards.
  ☆66Updated last year
• Disasm / hc245t-bypass
  ☆24Updated 4 years ago
• marcoreps / laser_driver
  Energy efficient constant current diode laser driver
  ☆44Updated 6 years ago
• Radio-Stack / caravel_ft8_receiver
  A fully-integrated FT8 protocol receiver on 130nm CMOS
  ☆60Updated 2 years ago
• mithro / kicad-pmod
  KiCad Library to make it easy to create both host boards and expansion boards and which are compatible with the Digilent "PMOD" specifica…
  ☆39Updated 4 years ago
• timonsku / M.2-Card-Footprints
  Footprints and template for making your own M.2 devices
  ☆106Updated 2 years ago
• will127534 / PCIe3_Hub
  A opensource PCIe 3.0 Hub design based on ASM2806 with Raspberry Pi 5's PCIe FPC connector design
  ☆62Updated 8 months ago
• mwelling / rp2040-pmod
  RP2040 MCU based PMOD
  ☆20Updated 7 months ago
• holysnippet / pico_eth
  RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver
  ☆34Updated last year