Fabian-Schmidt / esphome-victron_bleLinks
Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.
☆341Updated 5 months ago
Alternatives and similar repositories for esphome-victron_ble
Users that are interested in esphome-victron_ble are comparing it to the libraries listed below
Sorting:
- Victron Mppt charger ve.direct to esphome node☆382Updated 3 months ago
- Home Assistant plug-in for Victron Instant Readout compatible devices☆126Updated this week
- This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.☆254Updated this week
- Integration for Home Assistant to fetch data from the victron gx device via modbusTCP☆285Updated this week
- Adding WiFi monitoring to US2000B and US2000C batteries.☆150Updated 3 years ago
- ☆262Updated 2 weeks ago
- Esphome component for Deye 3 phase inverters for Home Assistant☆195Updated 11 months ago
- Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU☆57Updated 3 years ago
- Home Assistant Dashboard to display Inverter information. ESPHome configuration to collect inverter sensor data via modbus☆183Updated this week
- Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK, Supervolt and other BMS via Bluetooth☆432Updated last week
- ⚡A customizable Home Assistant card to emulate the Sunsynk System flow that's displayed on the Inverter screen.☆325Updated 2 weeks ago
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART, RS485 or BLE☆105Updated this week
- Victron BlueSmart IP22 Charger ve.direct interface☆28Updated last year
- Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.☆33Updated 4 months ago
- How to extract data from the EPEver TRACER-AN using the eBox-Wifi-01 with Home Assistant☆22Updated 5 years ago
- Der Esp8266 ist über ein Rs485 Modul mit dem Soyosource 1200 verbunden und kann diesem die Leistungswerte senden. ManualMode: Der Leistun…☆161Updated last year
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆194Updated last year
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆94Updated this week
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆192Updated last week
- Software for an esp8266 nodemcu to read data from APS inverters.☆143Updated 2 months ago
- Little Program for ESP82XX to get the Victron data to web and MQTT☆95Updated last month
- ESP8266/ESP32 decrypts wireless MBus frames from a Multical21 water meter☆110Updated 2 years ago
- Esphome configuration for Somfy Blind☆36Updated 4 years ago
- communicate over mqtt protocol to simulate a truma inetbox☆108Updated 8 months ago
- An integration for heatpumps handled by heishamon☆77Updated last month
- A smartmeter project, made for ESPHome (hardware + ESPHome config)☆82Updated last year
- Temperature and Humidity d-bus services for Victron GX☆19Updated 3 years ago
- Home Assistant customcomponent for SunSpec modbus devices☆79Updated last week
- ESPHome custom component for reading P1 data from electricity meters.☆317Updated 9 months ago
- Read data From Seplos BMS and send them to the Home Assistant☆46Updated 2 years ago