sparkfun / L6470-AutoDriver
BabyDriver stepper board. SPI driven 3A 8-45V, based on L6470 part from Linear
☆27Updated 4 years ago
Alternatives and similar repositories for L6470-AutoDriver:
Users that are interested in L6470-AutoDriver are comparing it to the libraries listed below
- The Big Easy Driver available from SparkFun Electronics☆25Updated 5 years ago
- EAGLE ULP for importing vector graphics☆31Updated 10 years ago
- SparkFun LED Driver Breakout -TLC5940☆12Updated 9 years ago
- Fyber Labs Flex Modules☆33Updated 7 years ago
- Convert KiCAD rpt files to G-Code to dispense solder paste☆24Updated 10 years ago
- Arduino library support for the SparkFun AutoDriver board based on the ST Micro L6470 stepper driver.☆16Updated 6 years ago
- 3D Engraving for the K40 laser cutter using Smoothieboard☆13Updated 8 years ago
- Adafruit 16-Channel PWM Servo Driver PCB Eagle Files☆61Updated 5 years ago
- ☆46Updated 6 years ago
- Arduino based laser controller☆10Updated 10 years ago
- Various hardware projects☆86Updated 7 years ago
- Hardware design for a 3 Phase BLDC controller☆57Updated 5 years ago
- ☆11Updated 8 years ago
- (Deprecated attempt at) A Smoothie firmware port to the Smoothieboard v2 boards.☆34Updated 7 years ago
- A ful metal CoreXY system for 3D printer, mill etc..☆47Updated 10 years ago
- ☆43Updated 7 years ago
- CNC and design files for DIY pick and place machines, auto and manual versions☆57Updated 10 years ago
- Low cost servo drive for small CNC machinery☆54Updated 8 years ago
- GUI for grbl.☆51Updated 7 years ago
- Embedded software (firmware) for the laser system and components, including configuration files☆27Updated 10 months ago
- An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Ar…☆15Updated 9 years ago
- Firmware for 3 Phase BLDC controller☆41Updated 4 years ago
- Simple *nix CLI for grbl and Other ATmega Firmwares☆16Updated 10 years ago
- ☆15Updated 10 years ago
- Sends file commands to a serial connected device☆18Updated 8 years ago
- Files concering PAIND PNP Feeder☆23Updated 6 years ago
- A subclass of Mike McCauley's excellent AccelStepper library (http://www.airspayce.com/mikem/arduino/AccelStepper) that uses an encoder t…☆10Updated 10 years ago
- Repository for uStepper☆98Updated 5 years ago
- Modified Marlin for parallel SCARA printers.☆21Updated 12 years ago
- Controller board for wheeled robots, based on the ESP8266 with three DC motors drivers, one-cell LiPo battery charger and Wifi connectivi…☆15Updated 8 years ago