slavikb / BaiMonLinks
ESP8266 - based Vaillant boiler E-Bus monitor, temperature/pressure publishing to Narodmon.ru
☆46Updated 3 years ago
Alternatives and similar repositories for BaiMon
Users that are interested in BaiMon are comparing it to the libraries listed below
Sorting:
- An M-bus master that poll a meter and logs data to an MQTT server☆52Updated 9 years ago
- RFLink for ESP, with MQTT client☆75Updated 2 years ago
- Automate your home with GoWired open source modules designed for wired communication.☆41Updated 2 years ago
- Arduino library and hardware shield to send and receive data from Opentherm devices☆181Updated 2 years ago
- MQTT 433.92 MHz radio-frequency device gateway☆137Updated 3 years ago
- ☆39Updated 8 years ago
- RF433Mhz decoding library☆61Updated 2 years ago
- Device to measure energy and temperature☆81Updated 6 years ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆110Updated 4 years ago
- Arduino/ESP8266/ESP32 OpenTherm Library for HVAC system control communication☆263Updated last year
- Burn HM-10 (CC2541) and Zigbee (CC2530 CC2531) firmware using NodeMCU board.☆44Updated 5 years ago
- Single relay with ds18b20 sensor for TI cc2530 and Sonoff Zigbee☆66Updated last year
- ESP8266 MQTT SDM ModBus Energy Meter☆22Updated 7 years ago
- ☆68Updated 6 years ago
- Take raw IR signal from a remote receiver and print out pulse lengths☆83Updated 9 months ago
- Provide ESP32 with Web, MQTT and OTA firmware using Arduino IDE or PlatformIO☆71Updated 7 years ago
- An ESP8266 WiFi accessible serial port☆46Updated 10 years ago
- This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…☆74Updated last year
- reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)☆258Updated last year
- ESP8266-based smart wall switch☆132Updated 7 years ago
- Collection of reusable componets for Z-stack 3.0.2☆26Updated 3 years ago
- Livolo light switch firmware☆22Updated 8 years ago
- Hardware and software to capture and decode the Mitsubishi M-NET HVAC protocol☆50Updated 10 years ago
- OpenTherm library to create thermostat for OpenTherm enabled boilers and HVACs using an OpenTherm controller and an ESP32 or other microc…☆74Updated 3 years ago
- Plugin ideas, concepts, user contributed, etc☆195Updated last year
- Growatt Inverter monitoring via MQTT using ESP8266 modbus interface☆69Updated 5 years ago
- Energy monitor with dashboard/metrics collector based on ESP32 controller and PeaceFair PZEM-004T/PZEM-004Tv30 Power Meter☆73Updated 11 months ago
- ESP8266 WLAN Control Unit for Gardena 9V Irrigation Valve No. 1251☆38Updated last year
- Readout of EMS protocol datagrams and transfer of data to Domoticz via Arduino☆90Updated 4 years ago
- An arduino library that implements the CC.Debugger protocol of TI☆23Updated 6 years ago