seandepagnier / RTIMULib2Links
9-dof, 10-dof and 11-dof IMU fusion library for Linux systems (development version)
☆24Updated last year
Alternatives and similar repositories for RTIMULib2
Users that are interested in RTIMULib2 are comparing it to the libraries listed below
Sorting:
- Flight Information Glass Panel for Tablet and Smartphone☆16Updated 3 years ago
- Electronic Flight Information System in Python☆65Updated last month
- Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules☆146Updated 4 years ago
- NMEA2000 CLI parser for Actisense-Serial NGT-1 Gateway and saving data to InfluxDB via UDP and publishing it with MQTT☆10Updated 5 years ago
- Open-source electronics for your boat☆47Updated 5 years ago
- Python library for the UBX protocol☆38Updated 4 years ago
- Estimate ocean wave height (or vessel heave), waves direction, and period from accelerations using IMU on esp32 using advanced Kalman fil…☆41Updated this week
- tinycore linux based distribution for raspberry pi to run pypilot☆14Updated 2 years ago
- free autopilot for sailboats written in python supporting signalk☆254Updated 2 weeks ago
- Expermental Aircraft Glass Cockpit☆23Updated 6 years ago
- opencpn pypilot plugin☆18Updated 6 months ago
- A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …☆34Updated 5 years ago
- ☆50Updated 4 years ago
- Arduino library for the fastest and simplest communication with u-blox GPS modules☆147Updated 10 months ago
- Universal Signal K sensor framework for the ESP32 platform☆175Updated 3 months ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 4 years ago
- Smaller PocketBeagle version of the BBBmini flight controller.☆85Updated 6 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆40Updated 3 years ago
- RTIMULib makes it easy to use 9-dof IMUs with embedded Linux systems (especially the Raspberry PI!)☆49Updated 4 years ago
- Sailor Hat for ESP32 hardware☆46Updated 7 months ago
- Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.☆90Updated 4 years ago
- python Ublox module☆105Updated last year
- Arduino and CMake library for communicating with uBlox GPS receivers.☆109Updated last year
- OGN Tracker implementation on ESP32 devices☆63Updated last year
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆60Updated 3 years ago
- Microsecond PPS time synchronization client for Raspberry Pi.☆34Updated 4 years ago
- Cross-platform libraries for the EM7180 Ultimate Sensor Fusion Solution☆30Updated 10 months ago
- AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)☆41Updated 6 years ago
- Library for handling NMEA0183 messages☆84Updated 9 months ago
- Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster☆31Updated 3 years ago