LibreSolar / bms-c1Links
16s / 100A Battery Management System
☆181Updated last year
Alternatives and similar repositories for bms-c1
Users that are interested in bms-c1 are comparing it to the libraries listed below
Sorting:
- Firmware for LibreSolar BMS boards based on bq769x0, bq769x2 or ISL94202☆200Updated 3 weeks ago
- Open-Source: Modular BMS based on LTC68XX & STM32 MCU for up to 400V EV battery pack☆291Updated 4 years ago
- Battery management system for 4-series li-ion packs☆61Updated 4 years ago
- Main firmware of the Huebner inverter project☆180Updated last month
- foxBMS 2, online documentation at https://docs.foxbms.org☆354Updated 5 months ago
- foxBMS 1, online documentation at https://iisb-foxbms.iisb.fraunhofer.de/foxbms/gen1/docs/html/latest/☆176Updated last year
- Electric skateboard oriented battery management system.☆354Updated 7 years ago
- This repository contains a Battery Management System slave board using the LTC6811 Battery Monitoring IC and STM32F446RE Microcontroller.☆43Updated 5 years ago
- Battery management system for up to 15 Li-ion cells using bq76940 or bq76930☆72Updated 3 years ago
- Breakout board for BQ76940 Battery Monitoring System☆167Updated 7 years ago
- The VESC BMS Firmware☆279Updated 11 months ago
- Firmware for Libre Solar MPPT/PWM charge controllers☆165Updated 2 years ago
- Firmware for the DieBieMS☆58Updated 4 years ago
- Custom PCB design and firmware, which serve as a ESC or BLDC controller, to drive brushless BLDC motors using my own control algorithms.☆79Updated 3 years ago
- Firmware for the CANable USB to CAN adapter☆241Updated 2 years ago
- STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, …☆151Updated last year
- Firmware for ENNOID-BMS☆29Updated 2 years ago
- FOC library for BLDC/PMSM compatible with all STM32 targets with FPU.☆212Updated 2 weeks ago
- gs_usb compatible firmware for candleLight, cantact and canable☆81Updated 4 years ago
- Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.☆18Updated 2 years ago
- Phobia Motor Controller☆86Updated last week
- Open source project that uses the CANable hardware from protofusion.org☆44Updated 5 months ago
- Repository for STM32WB55 based reflow toaster oven controller.☆14Updated 2 years ago
- Volvo MKII Open Hardware☆148Updated last year
- Eagle schematics of inverter main board, sensor boards and gate drivers☆78Updated 3 years ago
- MPPT charge controller with HS load switch and CAN bus☆101Updated 4 years ago
- Can Example for Arduino Core STM32☆258Updated 3 months ago
- Code for the Linduino, An Arduino Uno-based board that is compatible with many Analog Devices evaluation boards☆123Updated last year
- Low cost battery management system (BMS) rewritten for STM32☆63Updated 10 years ago
- LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.☆85Updated 3 years ago