Alternatives and similar repositories for WiredHut

Users that are interested in WiredHut are comparing it to the libraries listed below

• modtronix-com / esp32MX-E
  ☆32Updated 5 years ago
• gregdavill / obsidian-boa
  Compact ESP32-S2 development board.
  ☆102Updated 4 years ago
• Connaxio / espoir
  A PoE+ mikroBUS mainboard based on the ESP32
  ☆51Updated 2 years ago
• gcormier / kicad-pcbway
  This project template has pre-populated values in the PCB editor for the PCBWay minimums for their cheapest offering.
  ☆33Updated 6 years ago
• NicoHood / SecureLoader
  AVR USB HID Bootloader that protects against malicious firmware upgrades
  ☆13Updated 9 years ago
• DavidAntliff / esp32-freqcount
  ESP32 Frequency Counter using Pulse Counter and Remote Control modules
  ☆70Updated 4 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated 3 months ago
• ExploreEmbedded / Hornbill-ESP32-DEV
  ☆27Updated 8 years ago
• martinberlin / bistable-smart-switch
  An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)
  ☆29Updated 2 years ago
• tinypico / tinypico-arduino
  Arduino libraries and example code for TinyPICO
  ☆47Updated 2 years ago
• MitjaNemec / SaveRestoreLayout
  ☆27Updated 5 months ago
• TobleMiner / ESP32-Devkit-Type-C
  Breadboard friendly, USB Type C enabled, ESP32 Devkit compatible, JLCPCB assembly ready ESP32 devboard
  ☆88Updated 2 years ago
• electronut / ElectronutLabs-hackaBLE
  A tiny Nordic nRF52832 based board you can embed in your BLE projects.
  ☆42Updated 6 years ago
• LordBlick / kicadPanelizer
  KiCAD PCB panelization helper
  ☆30Updated 3 years ago
• HomeSmartMesh / nrf52_thread_sensortag
  nRF52840 small sensor Tag, Low power design, battery operated
  ☆41Updated last year
• Jana-Marie / temperature-logger
  Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.
  ☆63Updated 2 years ago
• OLIMEX / ESP32-DevKit-LiPo
  Open Source Hardware OSHW ESP32 development board designed with KiCAD to be pin to pin compatible with Espressif ESP32-DevKitC, but with …
  ☆83Updated 2 months ago
• akshar001 / chhavi
  Chhavi - A new Age of fingerprinting!
  ☆33Updated 2 years ago
• lucysrausch / esp32-led-smps
  230V main LED smps. 2x30W Constant Current.
  ☆28Updated 5 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆22Updated 6 years ago
• nRFMesh / nRF52_Mesh
  nRF52 custom RF mesh sensors and dongle firmware using nRF SDK
  ☆93Updated 3 years ago
• Wiz-IO / Arduino-Quectel-BC66
  Arduino port for Quectel BC66 LTE Narow Band modules ( OpenCPU based )
  ☆51Updated 5 years ago
• mike-rankin / ESP32_CoinCell_Color_TFT
  Based off of the CoinCell Board but with more sensors and a 80x160 ST7735 color tft lcd
  ☆57Updated 3 years ago
• LowPowerLab / CurrentRanger
  Precision auto-ranging current meter (ammeter)
  ☆104Updated 3 months ago
• asukiaaa / esp32bb
  A KiCad project for esp-wroom-32 and breadboard.
  ☆53Updated 6 years ago
• openwch / ch34x
  CH340, CH343, CH342, CH344,CH348
  ☆35Updated 2 years ago
• simap / ucurrent
  This is a slightly simplified variation on µCurrent that allows for measuring micro and nano amps.
  ☆20Updated 9 years ago
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆35Updated 6 years ago
• monkbroc / neopixel-saleae
  Neopixel protocol decoder for Saleae Logic Analyzer
  ☆21Updated 6 years ago
• cnlohr / tplink-raw-wifi
  Test using tp-links to do raw wifi.
  ☆44Updated 7 years ago