pepijndevos / 74xx-libertyLinks
☆13Updated 2 years ago
Alternatives and similar repositories for 74xx-liberty
Users that are interested in 74xx-liberty are comparing it to the libraries listed below
Sorting:
- mystorm sram test☆27Updated 7 years ago
- ☆67Updated 2 years ago
- ☆21Updated 3 years ago
- A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs☆60Updated 6 years ago
- An open source FPGA PCI core & 8250-Compatible PCI UART core☆41Updated 4 years ago
- Update IceStudio to support ColorLight 5A-75X, i5 and ICeSugar Pro FPGA boards☆47Updated last year
- Example Verilog code for Ulx3s☆40Updated 3 years ago
- Reusable Verilog 2005 components for FPGA designs☆43Updated 3 months ago
- CologneChip GateMate FPGA Module: GMM-7550☆22Updated this week
- Portable Verilog RTL interface to S27KL0641DABHI020 64Mbit HyperRAM IC☆88Updated 6 years ago
- This repo is for Efinix Xyloni development board users. It has projects and software to get you started working with the board.☆42Updated 2 years ago
- Programs for the FOMU, DE10NANO and ULX3S FPGA boards, written in Silice https://github.com/sylefeb/Silice☆35Updated last year
- QQSPI Pmod-compatible 32MB PSRAM module☆15Updated last year
- Documentation and tools related to DECA FPGA board☆21Updated last year
- iCE40HX8K development board with SRAM and bus for fast ADC, DAC, IOs☆35Updated 6 months ago
- Picorv32 SoC that uses only BRAM, not flash memory☆13Updated 6 years ago
- Documenting the Anlogic FPGA bit-stream format.☆88Updated 2 years ago
- Simplified environment for litex☆14Updated 4 years ago
- Yosys Plugins☆21Updated 5 years ago
- IceCore Ice40 HX based modular core☆46Updated 4 years ago
- soft processor core compatible with i586 instruction set(Intel Pentium) developped on Nexys4 board boots linux kernel with a ramdisk cont…☆32Updated 8 years ago
- NES FPGA implementation synthesized for the ulx3s ecp5 based fpga board☆37Updated 2 years ago
- S3GA: a simple scalable serial FPGA☆10Updated 2 years ago
- A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.☆38Updated last year
- ☆34Updated last year
- snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support☆28Updated 10 months ago
- Open-source HDMI/DVI transmitter for the Gowin GW1NSR-powered Tang Nano 4K☆24Updated 2 years ago
- DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.☆55Updated last year
- Information on cores available on the Ulx3s ECP5 FPGA board☆14Updated 5 years ago
- Experimental FPGA project for streaming two MIPI CSI camera streams to an HDMI monitor using a ULX3S FPGA board☆30Updated 2 years ago