hackup / ATF2FT232HQLinks
ATF1504-FT232HQ Shield
☆19Updated 4 years ago
Alternatives and similar repositories for ATF2FT232HQ
Users that are interested in ATF2FT232HQ are comparing it to the libraries listed below
Sorting:
- ☆17Updated 3 years ago
- 8 bit binary displayed as hex on two 7 segment displays (a bus monitor)☆10Updated last year
- Apple II VGA PCB☆14Updated 2 years ago
- F18A source HDL☆32Updated 6 years ago
- ☆17Updated 2 years ago
- This project allows you to test a Z80 CPU. NMOS/CMOS, UB880 identification. Functionality testing.☆30Updated 3 weeks ago
- This repository contains the KiCad files and the gerber files for the DuPAL boards.☆56Updated 10 months ago
- SN76489 Sound Card for RC2014☆49Updated 3 years ago
- ☆17Updated last month
- MSXDOS smaller 16K/32K rom with JIO, BEER and SODA IDE drivers and enhancements☆19Updated last week
- A Raspberry Pi Pico (RP2040) based Apple IIe expansion card with USB isolation.☆12Updated 4 years ago
- AY-3-8910 made out of discrete 74-series logic ICs☆29Updated 3 years ago
- Analog RGB 15Khz to VGA 31Khz in FGPA☆50Updated 9 years ago
- An FPGA-based disk controller card for the Apple II☆47Updated 6 years ago
- ☆24Updated last year
- DivTIESUS is a SD/MMC interface for the ZX Spectrum, compatible with ESXDOS. It is not a clone of Mario Pratto's DivMMC.☆48Updated last year
- Play vintage computer games on real hardware, single-step debug Z80 programs and test new hardware with the BusRaider for RC2014. https:/…☆23Updated 2 years ago
- A Raspberry Pi Pico based device to emulate a ROM on a ZX Spectrum☆39Updated 10 months ago
- Software and tools for the Little ATF150x programmer board☆14Updated 8 months ago
- MSX1 cloned in FPGA☆43Updated last year
- A second screen for the Commodore 64☆13Updated 4 years ago
- FPGATED based plus4 implementation using Papilio Pro platform☆20Updated 4 years ago
- The DisASseMbler FrameWork☆14Updated 2 years ago
- Macintosh floppy-drive/disk emulator by steve@bigmessowires.com☆24Updated 11 years ago
- Emulator for Yamaha's YM2148 chip☆11Updated 3 years ago
- PCB design for the pal dumper created by Charles MacDonald☆20Updated 8 years ago
- A computer based on the HD6309 CPU, done for the Retro Challenge 2017/04.☆16Updated 6 years ago
- Builds a standalone m68k GCC cross compiler, based on bebbo's amiga-gcc script☆21Updated last month
- Code and design repository for the 6809v2 SBC: To be released at VCFMW 13☆19Updated 7 years ago
- USB host and device drivers for the 65x02☆25Updated last month