Icenowy / u-bootLinks
"Das U-Boot" Source Tree
☆11Updated 4 years ago
Alternatives and similar repositories for u-boot
Users that are interested in u-boot are comparing it to the libraries listed below
Sorting:
- "Das U-Boot" Source Tree☆137Updated 2 years ago
- Linux kernel source tree☆178Updated 3 years ago
- openwrt for sigmastar SSD201/SSD202☆68Updated 2 years ago
- tools to help hacking Allwinner SoC devices☆65Updated 2 years ago
- Supports Banana Pi BPI-M2 Ultra (R40) / BPI-M2 Berry (V40) (Kernel3.10)☆58Updated 4 years ago
- STM32 USB simulates CH341.☆65Updated 8 years ago
- ☆36Updated last year
- Buildroot Package for F1C100s/200s☆188Updated 2 years ago
- small linux bootloader for Allwinner T113-S3 and V851s☆95Updated 8 months ago
- 8ms sigmastar SSD201/SSD202☆28Updated 3 years ago
- Lichee Zero: An SD-Size (breadboard-compatible) Cortex-A7 Board☆171Updated 4 years ago
- C8T6核心板JLINK固件(FW:J-Link STLink V2 compiled Jun 26 2017 1041)☆84Updated 2 years ago
- Linux kernel module to use ESP8089 / ESP8266 over SPI☆65Updated 5 years ago
- Linux kernel source tree☆123Updated last week
- Linux 4.4 Kernel Source Code for NUC980 Series Microprocessor☆49Updated last month
- U-Boot v2016.11 for NUC970, N9H30, and NUC980☆32Updated last week
- Buildroot Package Mainly for YuzukiHD Devices. Support Allwinner F1C100s/200s V3s V3x D1-H D1s T113 H616 BSP and Mainline☆175Updated 2 years ago
- 支持CMSIS-DAP v2接口协议,支持ARM、RISCV、ESP32等目标芯片,详见Wiki及release☆49Updated last month
- Buildroot support for Allwinner V3s/S3/S3L☆46Updated 9 months ago
- ☆65Updated 2 years ago
- 新内核,新引导,新文件系统,纯粹爱好,不定期维护.适配EasyARM-i.MX283A.☆23Updated 5 years ago
- IoT Board SDK with WinnerMicro W601☆59Updated 2 years ago
- WIRELESS CMSIS-DAP USB/IP-SWD/JTAG HID adapter firmware for ESP8266 boards☆109Updated 7 years ago
- riscv64 d1-nezha rt-thread(Allwinner D1 riscv chip)☆35Updated 3 years ago
- play with allwinner f1c100s/f1c200s☆74Updated 5 years ago
- nuc972 for RT-Thread 3.0☆27Updated 7 years ago
- Command-line access to F1C100s GPIO☆24Updated 6 years ago
- OpenOCD configuration for MT7688AN/MT7688KN/MT7628x☆38Updated 7 years ago
- uboot for mt76x8,Default console:115200,8,n,1,UART0,The web on ETH0☆91Updated 2 years ago
- ☆39Updated 5 years ago