Alternatives and similar repositories for Dtto-Modular-Robot

Users that are interested in Dtto-Modular-Robot are comparing it to the libraries listed below

• davidsanfal / miniloki
  Omnidirectional robotic platform
  ☆26Updated 9 years ago
• JavierIH / zowi
  An open-source and fully hackable biped robot.
  ☆162Updated 9 years ago
• jochenalt / Walter
  6DOF Industrial Robot, vintage style
  ☆156Updated 8 years ago
• jochenalt / Paul
  Paul, a depressed robot balancing on his ball
  ☆44Updated 8 years ago
• JRodrigoTech / xLIDAR
  Affordable and open-source LIDAR based on three VL53L0X ranging sensor.
  ☆68Updated 7 years ago
• ArcBotics / Hexy
  Hexy the Open-Source, Low-Cost Hexapod
  ☆122Updated 6 years ago
• danithebest91 / ServoStrap
  servo-controlled reprap 3D printer
  ☆100Updated 10 years ago
• cinderblock / 3-Phase-Driver
  Hardware design for a 3 Phase BLDC controller
  ☆56Updated 6 years ago
• sarinkhan / openWheel
  open source parametric wheels, tyres and tracks for robots meant for 3D printing
  ☆30Updated 4 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 6 years ago
• cho45 / GrblServer
  ☆64Updated 9 years ago
• jjrobots / B-ROBOT
  B-ROBOT Arduino self balancing robot from JJROBOTS.com
  ☆113Updated 5 years ago
• espway / espway
  Segway-like robot implemented on ESP8266
  ☆121Updated 4 years ago
• 9a / plotclock
  plotclock
  ☆175Updated 10 years ago
• JJulio / b-robot
  Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.
  ☆154Updated 11 years ago
• neuroprod / ClosedLoopDriver
  Arduino controler for a closed-loop stepper motor
  ☆87Updated 11 years ago
• tscha70 / 3DPrinterSTLFiles
  STL for your 3D-Printer or Print Sevice
  ☆130Updated 2 years ago
• synthetos / grblShield
  ☆139Updated 12 years ago
• Obijuan / ArduSnake
  Arduino modular snake robots library. Generate the locomotion of snake robots easily!
  ☆44Updated 10 years ago
• lhartmann / esp_rtos_reprap
  Stepper motor controller based on FreeRTOS for the ESP8266.
  ☆64Updated 9 years ago
• TurnkeyTyranny / laser-gcode-exporter-inkscape-plugin
  Inkscape GCode Exporter for K40 laser cutters running Marlin
  ☆56Updated 9 years ago
• arielnh56 / SonarI2C
  Arduino library supports many HC-SR04 sensors via I2C bus and hardware interrupt
  ☆27Updated 8 years ago
• EliteEng / grbl
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Ar…
  ☆15Updated 10 years ago
• tricorderproject / arducordermini
  Arducorder Mini
  ☆128Updated 11 years ago
• cinderblock / 3-Phase-Controller
  Firmware for 3 Phase BLDC controller
  ☆41Updated 5 years ago
• tinkerlog / PaintMachine
  ☆23Updated 10 years ago
• DiatomStudio / Piccolo
  Piccolo is a pocket-sized stand-alone CNC platform.
  ☆352Updated 8 years ago
• Protoneer / Raspberry-Pi-CNC
  Web interface for controlling a GRBL via a Raspberry Pi
  ☆90Updated 10 years ago
• mirobot / mirobot-chassis
  The CAD files for the Mirobot chassis
  ☆18Updated 9 years ago
• LaserWeb / deprecated-LaserWeb1
  Deprecated: use http://github.com/openhardwarecoza/LaserWeb3 instead
  ☆186Updated 9 years ago