ContextualElectronics / embedded-dev-envLinks
A Vagrant configuration that sets up the CE Embedded Development Environment. It is based off of the stm32-eclipse-linux-trusty64 project but uses a pre-configured Base Box hosted in Atlas.
☆10Updated 9 years ago
Alternatives and similar repositories for embedded-dev-env
Users that are interested in embedded-dev-env are comparing it to the libraries listed below
Sorting:
- ☆19Updated 3 years ago
- A low cost ISM radio to wifi gateway☆41Updated 5 years ago
- ChipCon Tiny Loader, a 1KB serial bootloader for CC1110/CC1111☆63Updated 13 years ago
- Highly configurable Beaglebone PRU-based DDS☆37Updated 8 years ago
- scripts for bill of materials generation from kicad☆13Updated 2 years ago
- Class exersizes to learn about cross compilation, programming and debugging using 1Bitsy, Black Magic Probe GCC and GDB.☆15Updated 8 years ago
- Automatically exported from code.google.com/p/dangerous-prototypes-open-hardware☆86Updated 2 years ago
- Fork of FBTFT for use with Adafruit TS shield☆39Updated 10 years ago
- This is a reference pcb and schematics for a custom Teensy 3.1 board in EAGLE CAD format. More info on this can be found in our blog post…☆42Updated 9 years ago
- Compact low-cost configurable clock generator with GPS sync option☆12Updated 10 years ago
- Arduino Core and Bootloader for the ATMEL SAM D21/R21 (E Variant) chips.☆29Updated 5 years ago
- PCB files for the Adafruit Si5351A Clock Generator Breakout☆15Updated 6 years ago
- Files for Articles written by MacroFab for the Engineering Blog.☆19Updated 6 years ago
- Scripts and tools for Eagle PCB Design software☆50Updated 3 years ago
- Add the MicroChip RN2483/RN2903 LoRaWAN module to Feather☆10Updated 9 years ago
- Scans LoRa channels displaying any monitored packets on the TFT display☆92Updated 8 years ago
- An Arduino library for sending AX.25 packets over the HopeRF RFM22/23 radio modules☆59Updated 5 years ago
- Software defined radio using Teensy 3.1, Teensy Audio shield and Softrock☆92Updated 8 years ago
- FemtoUSB - ATMEL ARM Cortex M0+ (SAMD21), 256KB @ 48MHz, 3V3☆60Updated 9 years ago
- Explorations of the Atmel CryptoAuthentication devices, particularly the AT88CK590 eval kit☆17Updated 8 years ago
- Python for BitBanging SPI PROM on IceZero FPGA board from RaspPi GPIO pins☆13Updated 6 years ago
- USB Full-Speed (12Mbps) protocol analyzer for the DSO Quad☆21Updated 12 years ago
- 300 MHz to 3800 MHz TCVR daughter card for the Parallella board☆18Updated 11 years ago
- This repository is deprecated. Go to:☆120Updated 6 years ago
- TinyCircuits TinyDuino Processor Board, Model ASM2001☆22Updated 5 years ago
- Setup and install for ARMinARM board.☆29Updated 9 years ago
- Isolated USB Serial Interface☆17Updated 10 years ago
- A 300 MHz to 3800 MHz RF module for the Novena Open Hardware Computing Platform☆53Updated 9 years ago
- SourceCode for DSO Quad HWv2.6☆75Updated last year
- Originally intended to be a controller for a RetroPie. A soft power controller that allows for Raspberry Pi proper shutdown. Intention is…☆22Updated 8 years ago