Batrium / WatchMonUdpListener
WatchMon UDP Binary Listener translates to JSON and stores to influxdb
☆30Updated 2 years ago
Alternatives and similar repositories for WatchMonUdpListener:
Users that are interested in WatchMonUdpListener are comparing it to the libraries listed below
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆81Updated last month
- Integrate Open_EVSE charger into Victron Energies Venus OS☆19Updated last year
- A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt☆125Updated last month
- ☆36Updated last week
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆22Updated 7 months ago
- Driver to embed the Chargery BMS to a Venus OS device☆32Updated last year
- SmartShunt ve.direct to ESPHOME node☆71Updated last year
- This Venus OS driver gets the data from MQTT and displays it as battery.☆51Updated 3 weeks ago
- Adding WiFi monitoring to US2000B and US2000C batteries.☆136Updated 2 years ago
- Integrate EVCC connected charger into Victron Ecosystem☆23Updated 10 months ago
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆54Updated 5 months ago
- Battery Monitor driver for serial battery in VenusOS GX systems☆74Updated last week
- ☆95Updated 4 months ago
- This Venus OS driver gets the data from MQTT and displays it as grid, genset or ac load meter.☆65Updated 3 weeks ago
- MQTT-dbus Bridge for Victron CerboGX (Venus) and Eastron SDM630 Power Meter☆26Updated 10 months ago
- Venus OS service mapping the D-Bus on Venus OS to MQTT☆113Updated 8 months ago
- OpenEVSE Integration for Home Assistant☆73Updated this week
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆177Updated 3 months ago
- Read data From Seplos BMS and send them to the Home Assistant☆42Updated last year
- Integrate Shelly 1PM into Victron Energies Venus OS as a pv inverter☆53Updated 6 months ago
- Integrate go-eCharger into Victron Energies Venus OS as a acload☆28Updated 9 months ago
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485☆75Updated 2 weeks ago
- Use a esp32 to push VE.Direct ASCII messages to a MQTT server☆59Updated 11 months ago
- Communicating with Victron energy products, also compatible with other inverters and solar equipement☆19Updated 6 years ago
- Little Program for ESP82XX to get the Victron data to web and MQTT☆57Updated last week
- Virtual service to merge multiple serial batteries☆68Updated 2 months ago
- Manages Victrion VenusOs VeCan (aka CANbus) ports☆50Updated 4 months ago
- Firmware for OpenEnergyMonitor OpenEVSE☆17Updated 2 years ago
- Growatt Inverter monitoring via MQTT using ESP8266 modbus interface☆66Updated 4 years ago
- A driver to integrate SMA SunnyIsland inverters with Victron Venus OS☆14Updated last year