shining-man / bsc_hwLinks
Hardware battery safety controller (BSC)
☆29Updated last year
Alternatives and similar repositories for bsc_hw
Users that are interested in bsc_hw are comparing it to the libraries listed below
Sorting:
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆92Updated last month
- Firmware battery safety controller (BSC)☆130Updated last week
- Der Esp8266 ist über ein Rs485 Modul mit dem Soyosource 1200 verbunden und kann diesem die Leistungswerte senden. ManualMode: Der Leistun…☆162Updated last year
- Seplos Controller mit Webseite Der Esp8266 ist über ein Rs485 Modul mit dem Seplos BMS verbunden und kann diesem seine Daten entlocken. S…☆28Updated 2 years ago
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆22Updated last year
- ☆20Updated 3 months ago
- Little Program for ESP82XX to get the Victron data to web and MQTT☆87Updated 2 weeks ago
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆172Updated 2 weeks ago
- This Venus OS driver gets the data from MQTT and displays it as battery.☆58Updated 4 months ago
- Read data From Seplos BMS and send them to the Home Assistant☆46Updated last year
- ☆51Updated 6 months ago
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆59Updated last year
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART, RS485 or BLE☆100Updated last month
- Esp-HuaweiR4850-Controller Das Huawei R4850G2 Recitfier Modul ist ein 3000Watt Lade Netzteil. Es kann über Datenkommunikation gesteuert w…☆70Updated last year
- ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT☆59Updated 2 weeks ago
- Modbus RTU to MQTT Gateway☆91Updated 3 weeks ago
- This Venus OS driver gets the data from MQTT and displays it as solar charger.☆24Updated 6 months ago
- A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt☆139Updated 2 months ago
- ESPHome component to monitor a Solax X1 mini via RS485☆39Updated last month
- Integrate Shelly 1PM into Victron Energies Venus OS as a pv inverter☆57Updated last year
- Brings EVSE WB/DIN into your WiFi☆81Updated 2 years ago
- T2SG *.bin file for a ESP8266 WEMOS D1 mini. Its purpose is to read the total power from a Shelly 3EM and send it via UART to Trucki's RS…☆122Updated 3 months ago
- Integrate Open_EVSE charger into Victron Energies Venus OS☆19Updated 2 years ago
- Integrate EVCC connected charger into Victron Ecosystem☆26Updated last year
- Contains an Arduino project for Espressif ESP32 that will run a web server with web sockets to display data from a Victron MPPT charge co…☆28Updated 5 years ago
- Adding WiFi monitoring to US2000B and US2000C batteries.☆148Updated 2 years ago
- RS485-Interface-for-Sun-GTIL2-1000☆52Updated last year
- ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus☆16Updated last month
- This Venus OS driver gets the data from MQTT and displays it as pv inverter.☆80Updated 6 months ago
- Manages Victrion VenusOs VeCan (aka CANbus) ports☆52Updated 5 months ago