Alternatives and similar repositories for nmea-gps-emulator

Users that are interested in nmea-gps-emulator are comparing it to the libraries listed below

• panaaj / nmeasimulator
  NMEA Sentence Generator
  ☆158Updated 2 years ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆32Updated 3 years ago
• jangleboom / RTKBaseStation
  Real time kinematics base station (ESP32 + ZED-F9P)
  ☆41Updated 2 years ago
• nebkat / esp32-xbee
  ESP32 XBee UART Interface
  ☆113Updated 2 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆102Updated 2 weeks ago
• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆42Updated 6 years ago
• ttlappalainen / NMEA0183
  Library for handling NMEA0183 messages
  ☆88Updated last year
• emlid / ntripbrowser
  CLI tool to easily get NTRIP caster information
  ☆33Updated 5 months ago
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• semuconsulting / pynmeagps
  Python library for parsing and generating NMEA 0183 GNSS/GPS protocol messages.
  ☆101Updated last week
• AK-Homberger / NMEA2000-VoyageDataRecorder
  This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…
  ☆27Updated 4 years ago
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆21Updated last year
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• sparkfun / SparkFun_Ublox_Arduino_Library
  Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
  ☆147Updated 4 years ago
• u-blox / ublox-C099_F9P-uCS
  ☆63Updated 5 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• mtz8302 / AOG_GPS_ESP32
  DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …
  ☆42Updated 2 years ago
• Tinkerbug-Robotics / TinkerRTKLoRa
  Arduino sketches for TinkerRTK using TinkerSend LoRa radios
  ☆17Updated last year
• sparkfun / SparkFun_u-blox_GNSS_v3
  An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
  ☆92Updated 2 months ago
• phryniszak / lc29h
  Local RTK solution for LC29H
  ☆24Updated last year
• commschamp / cc.ublox.commsdsl
  CommsDSL schema-based definition of UBLOX protocol
  ☆43Updated 2 weeks ago
• lansalot / FreeRTK
  How to set up your own RTK base station
  ☆43Updated last year
• incarvr6 / esp32-ntrip-DUO
  ESP32 NTRIP Interface
  ☆68Updated 10 months ago
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆58Updated 6 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆124Updated last year
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆22Updated last year
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆50Updated 2 years ago
• opencpn-radar-pi / radar_pi
  Radar plugin for OpenCPN with support for Navico and some Garmin and Raymarine radars
  ☆98Updated this week
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆23Updated last year
• VladimirKalachikhin / Galadriel-map
  Raster tiles chartplotter
  ☆22Updated this week