Alternatives and similar repositories for McuLink-Mini

Users that are interested in McuLink-Mini are comparing it to the libraries listed below

• Fescron / universal-jlink-adapter
  20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well …
  ☆78Updated 2 months ago
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆53Updated 3 weeks ago
• adfernandes / segger-rtt
  The original, unmodified Segger RTT source files distributed with JLink
  ☆37Updated this week
• esynr3z / openocd-svd
  Standalone OpenOCD and CMSIS-SVD based peripheral register viewer written on Python
  ☆33Updated 6 years ago
• 1udo6arre / svd-tools
  This repository groups a set of tools using svd features for debuging...
  ☆28Updated 2 years ago
• openwch / risc-none-embed-gcc
  Toolchain for CH32duino
  ☆15Updated 2 years ago
• openwch / ch32x035
  32-bit RISC-V MCU CH32X035 built-in USB PD PHY
  ☆59Updated 3 months ago
• STMicroelectronics / x-cube-usb-pd
  x-cube-usb-pd STM32 Expansion Package related to USB-IF Type-C Power Delivery protocol is no more recommended for new design. The USB pow…
  ☆56Updated last year
• blackmagic-debug / blackmagic-hardware
  Hardware design files for the Black Magic Probe
  ☆126Updated 2 years ago
• kaidegit / CMSIS-DAPbyWCH
  a cheap CMSIS-DAP debugger by an WCH chip named CH549F
  ☆45Updated 4 years ago
• esden / stm32-kicad-lib
  KiCad libraries generated from the STM32Cube database.
  ☆60Updated last month
• robots / wch-ch32v20x-flash
  ☆12Updated last year
• curtisseizert / Nanovoltmeter
  A low noise nanovoltmeter design files and code
  ☆27Updated last year
• elzoughby / STM32H7xx-Startup
  An independent, easy to read Startup Code written in "C" for STM32H743xx microcontrollers
  ☆32Updated 6 years ago
• SEGGERMicro / RTT
  SEGGER RTT Sources
  ☆52Updated 3 years ago
• tobermory / faultHandling-cortex-m
  Generating, exporting and analyzing CPU fault conditions on Arm Cortex-M series microcontrollers.
  ☆25Updated 7 months ago
• lupyuen / qfplib
  ARM Cortex-M0 floating-point library in 1 kbyte. From http://www.quinapalus.com/qfplib.html
  ☆27Updated 6 years ago
• michahoiting / rv-link
  RV-Link: In application debugger for RISC-V micro-controllers, RISC-V emulator, running on RISC-V development boards (e.g. Sipeed Longan …
  ☆28Updated 4 years ago
• nxp-mcuxpresso / vscode-for-mcux
  Support for NXP Visual Studio Code for MCUXpresso Extension project.
  ☆25Updated 3 weeks ago
• linux-automation / candleLightFD
  USB CAN-FD interface based on the STM32G0 that works well with gs_usb on Linux
  ☆27Updated last year
• martinribelotta / imxrt1020-module
  iMX RT 1020 CPU module
  ☆34Updated 5 years ago
• MartinD-CZ / ST-Link-V21-clone
  A clone of the ST-Link V2.1 with the VCP+MSD+SWO features available.
  ☆70Updated 4 years ago
• lambdaconcept / usbsniffer
  Gateware for USB2Sniffer
  ☆29Updated 4 years ago
• gregdavill / CH32V307-makefile-example
  Example Makefile project for the CH32V307
  ☆28Updated 3 years ago
• phryniszak / strtt
  Segger RTT console using ST-link
  ☆56Updated 11 months ago
• pengi / arm_gdb
  Python module for an easier access to analyze ARM Cortex-M peripherals
  ☆25Updated 3 months ago
• raspberrypi / CMSIS-RP2xxx-DFP
  ☆22Updated last month
• diegoherranz / steppenprobe
  Open Source Hardware JTAG/SWD/UART/SWO interface board
  ☆35Updated 11 months ago
• joeltroughton / uSMU
  Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware
  ☆113Updated 3 months ago
• STMicroelectronics / STM32_open_pin_data
  This repo provides all the information required for the pin and board configuration of products based on STM32 MCU.
  ☆67Updated 3 months ago