Alternatives and similar repositories for edidoom

Users that are interested in edidoom are comparing it to the libraries listed below

• jadonk / PocketBone
  Smalls mint tin sized BeagleBone
  ☆58Updated 8 years ago
• Ttl / sam_board
  Hardware and software files for custom AT91SAM9N12 Linux board
  ☆190Updated 10 years ago
• zapta / arm
  ARM related stuff
  ☆124Updated 9 years ago
• richardhawthorn / piZero-Hub
  A compact USB hub for the Raspberry Pi Zero
  ☆99Updated 9 years ago
• ghewgill / emulino
  Arduino emulator
  ☆192Updated 16 years ago
• felis / Arduino_Camera_Control
  PTP, Camera-specific layers to work with Arduino USB Host Shield
  ☆190Updated 14 years ago
• jcmvbkbc / xtensa-toolchain-build
  Xtensa toolchain building scripts
  ☆39Updated last year
• steve-bate / ChibiOS-RPi
  ChibiOS fork for Raspberry PI experimentation. See wiki for Pi-specific information.
  ☆87Updated 6 years ago
• spark3dp / ember-firmware
  Firmware for Autodesk Ember 3D printer
  ☆87Updated 8 years ago
• fritzing / eagle2fritzing
  Converters from EAGLE to Fritzing file format
  ☆130Updated 2 years ago
• sparkfun / Bus_Pirate
  Troubleshooting tool for embedded devices available from SparkFun Electronics
  ☆75Updated 6 years ago
• mariolukas / openexposer
  Open Exposer - Hardware, Slicer, Host, Firmware
  ☆67Updated 9 years ago
• felis / UHS30
  For information about the project see README below
  ☆138Updated 8 months ago
• moonpunchorg / pcieduino
  Arduino on a mini-PCIe card
  ☆99Updated 10 years ago
• mastrogippo / 1337-3310-tool
  An hacker's swiss knife in the form factor of the best phone ever
  ☆18Updated 10 years ago
• deltabeard / cmio
  Custom Raspberry Pi Compute Module (1/3) IO Board
  ☆32Updated 7 years ago
• richardghirst / Panalyzer
  A Logic Analyzer based on the RaspberryPi
  ☆161Updated 11 years ago
• samuelpowell / CX10-FNRF
  Cheerson CX10 rate mode firmware with integrated RF
  ☆69Updated 7 years ago
• tricorderproject / arducordermini
  Arducorder Mini
  ☆128Updated 11 years ago
• lachlanA / eagle-to-kicad-libs
  Convert from Eagle libs to KiCad lib and modules
  ☆82Updated 7 years ago
• MartyMacGyver / OLED_SSD1322
  Driving OLEDs based on the SSD1322 chipset
  ☆18Updated 9 years ago
• cnlohr / pylotron
  Embedded VNC-based FPS.
  ☆59Updated 7 years ago
• raspberrypi / raspiraw
  Example app directly receiving raw data from CSI2 sensors
  ☆270Updated last year
• parallaxinc / PropellerIDE
  An easy-to-use, cross-platform IDE for the Parallax Propeller
  ☆71Updated 3 years ago
• niberger / joysix
  ☆19Updated 9 years ago
• reprappro / Marlin
  Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
  ☆46Updated 8 years ago
• voltivo / davinci_filament_reset_arduino
  Da Vinci 3D Printer Filament EEPROM Reset Arduino Sketch
  ☆87Updated 5 years ago
• chipKIT32 / PIC32-avrdude-bootloader
  The 'new' bootloader for MPIDE/chipKIT PIC32 boards
  ☆46Updated last year
• mgottschlag / rpi-swd
  Serial Wire Debug programmer for the Raspberry Pi
  ☆13Updated 12 years ago
• sfgit / ESP8266-01-BREAKOUT
  ESP8266-01 Breakout Board
  ☆34Updated 10 years ago