dragonlock2 / zephyrboardsLinks
Zephyr RTOS board definitions for extra boards
☆15Updated 9 months ago
Alternatives and similar repositories for zephyrboards
Users that are interested in zephyrboards are comparing it to the libraries listed below
Sorting:
- slCAN compatible firmware for STM32f103C8T6☆70Updated 3 years ago
- Firmware to support gs_usb on most STM32 devices☆43Updated 2 months ago
- Segger RTT console using ST-link☆55Updated 11 months ago
- gs_usb compatible firmware for candleLight, cantact and canable☆71Updated 3 years ago
- Generating, exporting and analyzing CPU fault conditions on Arm Cortex-M series microcontrollers.☆25Updated 7 months ago
- Yet another USB-CAN adapter.☆12Updated 3 years ago
- CANFD Plugin for Saleae Logic Analyzer☆30Updated 8 months ago
- Open source project that uses the CANable hardware from protofusion.org☆38Updated 5 years ago
- Firmware for SM-1301 USB-CAN FD adapter☆26Updated this week
- Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate☆29Updated 6 years ago
- 20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well …☆77Updated 2 months ago
- x-cube-usb-pd STM32 Expansion Package related to USB-IF Type-C Power Delivery protocol is no more recommended for new design. The USB pow…☆55Updated last year
- FOC Motor Control Firmware☆84Updated last year
- ☆15Updated last month
- To have platform independent network interfaces over usb which is working with Linux, Windows, Mac OS ect. called RNDIS. This project is …☆34Updated 5 months ago
- ESP32 IDF component for SWD communication☆65Updated 4 years ago
- slcan firmware for the CVRA CAN to USB dongle☆37Updated 4 years ago
- USB to CAN adapter firmware☆73Updated 2 weeks ago
- STM32 CAN-bus bootloader☆76Updated 8 years ago
- A set of python scripts to create dfu files and upload them to stm32 boards☆76Updated 3 years ago
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆45Updated 4 years ago
- This is project SuperCAN. An open source USB to CAN-FD protocol.☆83Updated last month
- This is an Open Source Hardware USB to CAN-FD Interface☆65Updated 3 months ago
- Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!☆79Updated last year
- can bootloader for use with stm32 microcontrollers☆41Updated 3 years ago
- SENT (SAE J2716) Analyzer for Saleae USB logic analyzer☆13Updated 4 years ago
- ☆65Updated 9 years ago
- SEGGER RTT Sources☆52Updated 3 years ago
- A small embedded systems tracer with support for bare-metal and FreeRTOS-based targets.☆30Updated last month
- MCP2517FD, MCP2518FD and MCP251863 driver☆41Updated 2 months ago