leodesigner / powmr_comm
PowMr Inverter serial communication protocol reverse engineering
☆76Updated last year
Alternatives and similar repositories for powmr_comm:
Users that are interested in powmr_comm are comparing it to the libraries listed below
- ESPHome config for various PowMr Hybrid Inverter models.☆138Updated 4 months ago
- ESPHome configuration to monitor and control a ISolar/EASUN SMG II inverter via RS232☆90Updated 2 weeks ago
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆139Updated 2 weeks ago
- Inverter 8851 protocol ESPHome integration☆18Updated last month
- ESPHome component to monitor and control a pipsolar inverter via RS232☆118Updated 2 weeks ago
- Yet another multi-BMS Merging Solution☆80Updated last week
- ESP8266 based WiFi and MQTT interface for MPPT Inverters that use watchpower☆218Updated last month
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆180Updated 5 months ago
- ☆100Updated 4 months ago
- ☆61Updated 2 years ago
- Converts the JK-BMS RS485 data to Pylontech CAN data☆75Updated 5 months ago
- ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters☆28Updated 3 years ago
- ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)☆52Updated 2 weeks ago
- JBD BMS Linux utility☆59Updated 10 months ago
- ESPHome component to monitor and control a ANT-BMS via UART☆57Updated 2 weeks ago
- ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…☆38Updated last month
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485☆83Updated 2 weeks ago
- JK BMS to PYLON CANBUS Protocol converter☆34Updated 2 years ago
- Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK and Supervolt BMS via Bluetooth☆354Updated this week
- ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).☆32Updated last year
- This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.☆111Updated this week
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆81Updated 2 weeks ago
- Read data From Seplos BMS and send them to the Home Assistant☆44Updated last year
- Documentation collection about controlling an EASUN-ISOLAR-SMX-II chinese off-grid solar inverter☆39Updated 4 months ago
- Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)☆42Updated 3 years ago
- ESPHome component to monitor and control some Atorch meters via bluetooth☆74Updated 2 weeks ago
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆161Updated 3 weeks ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆15Updated this week
- Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy☆100Updated 6 months ago