syssi / esphome-smg-ii
ESPHome configuration to monitor and control a ISolar/EASUN SMG II inverter via RS232
☆94Updated this week
Alternatives and similar repositories for esphome-smg-ii:
Users that are interested in esphome-smg-ii are comparing it to the libraries listed below
- ESPHome component to monitor and control a pipsolar inverter via RS232☆121Updated 2 months ago
- ☆17Updated 4 months ago
- ESP8266 based WiFi and MQTT interface for MPPT Inverters that use watchpower☆228Updated this week
- ESPHome config for various PowMr Hybrid Inverter models.☆145Updated 6 months ago
- Inverter 8851 protocol ESPHome integration☆20Updated 3 months ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆183Updated 7 months ago
- Yet another multi-BMS Merging Solution☆93Updated last week
- ☆100Updated 6 months ago
- ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…☆46Updated last month
- PowMr Inverter serial communication protocol reverse engineering☆80Updated last year
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆145Updated this week
- ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)☆55Updated 2 months ago
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485☆88Updated this week
- This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.☆131Updated this week
- Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK and Supervolt BMS via Bluetooth☆375Updated last month
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆16Updated last month
- ESPHome component to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE☆632Updated this week
- Documentation collection about controlling an EASUN-ISOLAR-SMX-II chinese off-grid solar inverter☆40Updated 5 months ago
- Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.☆23Updated 2 weeks ago
- Converts the JK-BMS RS485 data to Pylontech CAN data☆78Updated last month
- Adding WiFi monitoring to US2000B and US2000C batteries.☆144Updated 2 years ago
- JK BMS to PYLON CANBUS Protocol converter☆34Updated 2 years ago
- Home Assistant Dashboard to display Inverter information. ESPHome configuration to collect inverter sensor data via modbus☆139Updated last month
- ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT☆53Updated 2 weeks ago
- Esphome component for Deye 3 phase inverters for Home Assistant☆165Updated 4 months ago
- Home Assistant custom component for Pylontech (high voltage) BMS accessed via console☆16Updated 10 months ago
- dessmonitor.com API integration into HomeAssistant☆32Updated 3 months ago
- Read data From Seplos BMS and send them to the Home Assistant☆44Updated last year
- ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters☆29Updated 3 years ago
- ESPHome component to monitor a Solax X1 mini via RS485☆39Updated this week