softwarecrash / Solar2MQTTLinks
ESP8266 based WiFi and MQTT interface for MPPT Inverters that use watchpower
☆246Updated last month
Alternatives and similar repositories for Solar2MQTT
Users that are interested in Solar2MQTT are comparing it to the libraries listed below
Sorting:
- ESPHome configuration to monitor and control a ISolar/EASUN SMG II inverter via RS232☆105Updated last week
- ESPHome component to monitor and control a pipsolar inverter via RS232☆127Updated 2 weeks ago
- ESPHome config for various PowMr Hybrid Inverter models.☆154Updated 9 months ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆188Updated 10 months ago
- Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK and Supervolt BMS via Bluetooth☆402Updated 4 months ago
- Yet another multi-BMS Merging Solution☆111Updated this week
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆166Updated last week
- ☆102Updated 9 months ago
- ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…☆56Updated 4 months ago
- ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)☆59Updated 2 weeks ago
- This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.☆192Updated this week
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART, RS485 or BLE☆98Updated last week
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆172Updated 2 months ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆17Updated 2 months ago
- Monitoring application for hybrid inverters using the Voltronic communication protocol & JK BMS via USB port.☆98Updated 7 months ago
- PowMr Inverter serial communication protocol reverse engineering☆84Updated 2 years ago
- Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.☆25Updated last week
- Read data From Seplos BMS and send them to the Home Assistant☆45Updated last year
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆90Updated 2 weeks ago
- Esphome component for Deye 3 phase inverters for Home Assistant☆176Updated 7 months ago
- ☆17Updated 3 weeks ago
- Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…☆179Updated last month
- ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT☆59Updated last month
- Inverter 8851 protocol ESPHome integration☆20Updated 6 months ago
- ESPHome component to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE☆709Updated last week
- Adding WiFi monitoring to US2000B and US2000C batteries.☆148Updated 2 years ago
- ESPHome component to monitor and control some Atorch meters via bluetooth☆80Updated 2 weeks ago
- ESPHome config to monitor and management various PowMr Hybrid Inverter models and Inverters that supported by the WIFI-VM (WiFi Plug Pro)…☆10Updated 5 months ago
- Converts the JK-BMS RS485 data to Pylontech CAN data☆87Updated 4 months ago
- PTVO firmware for CC2530, CC2531, and CC2652 Zigbee chips☆239Updated 4 months ago