sabatex / NetDaemonApps.InverterAnenji-4kw-7.2kw
OpenESS (Anenji 4kw/7.2kw)
☆11Updated last week
Alternatives and similar repositories for NetDaemonApps.InverterAnenji-4kw-7.2kw:
Users that are interested in NetDaemonApps.InverterAnenji-4kw-7.2kw are comparing it to the libraries listed below
- Simple monitoring for Anern hybrid solar 6.2kW inverter over RS232☆12Updated 2 years ago
- Inverter 8851 protocol ESPHome integration☆18Updated last month
- ESPHome configuration to monitor and control a ISolar/EASUN SMG II inverter via RS232☆91Updated 3 weeks ago
- ESPHome component to monitor and control some Atorch meters via bluetooth☆75Updated 3 weeks ago
- ☆30Updated last month
- PowMr Inverter serial communication protocol reverse engineering☆77Updated last year
- ESPHome component to monitor and control a pipsolar inverter via RS232☆120Updated 3 weeks ago
- ESP32-C6 zigbee sensor example☆53Updated last year
- PowMr 4500W/6500W Inverter communication protocol☆13Updated 6 months ago
- It is a wireless temperature, pressure and humidity sensor, supports working in Zigbee networks. (Zigbee2mqtt open source project). Built…☆69Updated 3 months ago
- ESP8266 based WiFi and MQTT interface for MPPT Inverters that use watchpower☆219Updated last month
- An alternative firmware version for the SONOFF SNZB-02 temperature and humidity sensor. Adjustable sleep interval via zigbee network, the…☆93Updated 11 months ago
- Custom firmware for devices on the TLSR825x chip operating simultaneously in Zigbee 3 and Bluetooth LE☆59Updated 8 months ago
- SDM power meter to esphome node☆11Updated 3 years ago
- ☆36Updated 5 months ago
- BLE Advertisements Repeater into Ethernet TCP/IP☆15Updated last year
- An SD card component for esphome☆26Updated 2 weeks ago
- ESP32 OpenTherm Wi-Fi Thermostat☆56Updated last year
- example config wt32sc01 screen with esphome controlling home assistant entities and using ha weather forecast☆22Updated 2 months ago
- Прошивка для контрольки на Arduino☆13Updated last year
- ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)☆54Updated 3 weeks ago
- ☆87Updated 3 weeks ago
- This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.☆118Updated this week
- ☆19Updated last year
- DIY Power Monitor project using PZEM-004T module and ESP-12F☆18Updated 2 years ago
- ☆12Updated 3 months ago
- Hello NXP JN5169 Zigbee☆76Updated 10 months ago
- Watermeter ZigBee TLSR8258☆71Updated last week
- LVGL ESP32-S3-4848s040 firmware☆45Updated 3 weeks ago
- EFR32 dev firmware for different projects☆45Updated last year