pmcgn / dbus-modbus-client-kostal-smartmeterLinks
☆21Updated last month
Alternatives and similar repositories for dbus-modbus-client-kostal-smartmeter
Users that are interested in dbus-modbus-client-kostal-smartmeter are comparing it to the libraries listed below
Sorting:
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆22Updated last year
- Hardware battery safety controller (BSC)☆29Updated last year
- Victron Venus Os Plugin for Plenticore Plus inverters☆22Updated 7 months ago
- Der Esp8266 ist über ein Rs485 Modul mit dem Soyosource 1200 verbunden und kann diesem die Leistungswerte senden. ManualMode: Der Leistun…☆159Updated last year
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆57Updated 11 months ago
- This Venus OS driver emulates a MultiPlus-II in order to see the right AC load and flow, if you have the MQTT PV, Grid and Battery driver…☆20Updated 8 months ago
- Little Program for ESP82XX to get the Victron data to web and MQTT☆82Updated last week
- Victron VenusOS dbus binding for Kostal Plenticore inverters☆11Updated 3 years ago
- Modbus RTU to MQTT Gateway☆90Updated 3 weeks ago
- This Venus OS driver gets the data from MQTT and displays it as battery.☆57Updated 2 months ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆89Updated last week
- Firmware battery safety controller (BSC)☆126Updated this week
- A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt☆135Updated 2 weeks ago
- Integrate Open_EVSE charger into Victron Energies Venus OS☆19Updated 2 years ago
- This Venus OS driver gets the data from MQTT and displays it as solar charger.☆24Updated 4 months ago
- This Venus OS driver gets the data from MQTT and displays it as pv inverter.☆74Updated 4 months ago
- Read data From Seplos BMS and send them to the Home Assistant☆45Updated last year
- Adding WiFi monitoring to US2000B and US2000C batteries.☆147Updated 2 years ago
- Small utility to read data from DEYE Inverters (and clones)☆105Updated 2 months ago
- T2SG *.bin file for a ESP8266 WEMOS D1 mini. Its purpose is to read the total power from a Shelly 3EM and send it via UART to Trucki's RS…☆120Updated last month
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆172Updated 2 months ago
- Seplos Controller mit Webseite Der Esp8266 ist über ein Rs485 Modul mit dem Seplos BMS verbunden und kann diesem seine Daten entlocken. S…☆27Updated 2 years ago
- Integrate Shelly 1PM into Victron Energies Venus OS as a pv inverter☆56Updated last year
- Plugin for FlashMQ that interfaces between DBUS and MQTT.☆53Updated 3 weeks ago
- ☆44Updated last month
- ESPHome component to monitor a Solax X1 mini via RS485☆39Updated last week
- Victron BlueSmart IP22 Charger ve.direct interface☆26Updated last year
- ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus☆16Updated last week
- Communicate with Viessmann boilers using the optolink for ESP8266 and ESP32☆130Updated last month
- EspEpeverController mit Webseite, Der Esp8266 ist über ein Rs485 Modul mit dem Epever Solar Laderegler verbunden und kann diesen die verf…☆44Updated last year