victronenergy / dbus-modbus-client
Client for both ModbusTCP and RTU
☆28Updated this week
Alternatives and similar repositories for dbus-modbus-client:
Users that are interested in dbus-modbus-client are comparing it to the libraries listed below
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆22Updated 10 months ago
- This Venus OS driver gets the data from MQTT and displays it as solar charger.☆20Updated last month
- This Venus OS driver gets the data from MQTT and displays it as battery.☆56Updated last week
- A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt☆131Updated 3 months ago
- This Venus OS driver emulates a MultiPlus-II in order to see the right AC load and flow, if you have the MQTT PV, Grid and Battery driver…☆18Updated 5 months ago
- Manages Victrion VenusOs VeCan (aka CANbus) ports☆50Updated 6 months ago
- Plugin for FlashMQ that interfaces between DBUS and MQTT.☆42Updated 2 months ago
- ☆31Updated 8 months ago
- Integrate Open_EVSE charger into Victron Energies Venus OS☆19Updated last year
- Raspberry Pi 7" touchscreen for Venus OS (also HDMI)☆44Updated 2 months ago
- This Venus OS driver gets the data from MQTT and displays it as pv inverter.☆67Updated last month
- Integrate Shelly 1PM into Victron Energies Venus OS as a pv inverter☆55Updated 8 months ago
- Temperature and Humidity d-bus services for Victron GX☆18Updated 2 years ago
- Read data From Seplos BMS and send them to the Home Assistant☆44Updated last year
- MQTT-dbus Bridge for Victron CerboGX (Venus) and Eastron SDM630 Power Meter☆27Updated last year
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆56Updated 8 months ago
- This Venus OS driver gets the data from MQTT and displays it as temperature sensor.☆16Updated last month
- ☆40Updated last week
- Integrate Shelly 3EM smart meter into Victron Energies Venus OS☆145Updated 10 months ago
- This Venus OS driver gets the data from MQTT and displays it as grid, genset or ac load meter.☆76Updated this week
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆82Updated last week
- Integrate EVCC connected charger into Victron Ecosystem☆26Updated last year
- Little Program for ESP82XX to get the Victron data to web and MQTT☆66Updated 2 months ago
- Venus OS service mapping the D-Bus on Venus OS to MQTT☆112Updated 10 months ago
- Integrate opendtu and ahoy into Victron Energies Venus OS as a pv inverter☆133Updated 3 weeks ago
- Battery Monitor driver for serial battery in VenusOS GX systems☆108Updated this week
- ☆39Updated this week
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485☆83Updated last month
- Hardware battery safety controller (BSC)☆26Updated 11 months ago
- Integrate Shelly single phase energy meters into Victron Energies Venus OS☆20Updated this week