jbilander / Gotek_internal_A500_mount
An internal Gotek mounting bracket for Amiga 500 designed in DesignSpark V4
☆14Updated last year
Alternatives and similar repositories for Gotek_internal_A500_mount:
Users that are interested in Gotek_internal_A500_mount are comparing it to the libraries listed below
- PCMCIA SRAM card project (Sakura) - rev 2.1.2019☆11Updated 5 years ago
- A remake of the RA5-512K expansion memory for the Amiga 500 made in diptrace☆18Updated 5 years ago
- Replace the old 44256 DRAM chips on your A500 with newer SRAM memory☆3Updated 5 years ago
- The reverse engineered schematics for the Action Replay II/III for the Amiga. The eventual end goal of this project is to reimplement the…☆13Updated 2 years ago
- This is a Kernal Adapter/Switch for the Commodore C64 long board☆17Updated 3 years ago
- ReAmiga 3000TH by John 'Chucky' Hertell converted to KiCAD☆19Updated 4 years ago
- Fancy Kickstart Switcher for A500-A600-A1200-A4000☆18Updated 5 months ago
- A knockoff of the A1050 front mounted RAM Expansion for the Amiga 1000☆12Updated last year
- A PSU for the Commodore C64 and up to two 1541-II floppy disk drives☆24Updated 2 years ago
- Amiga 500+ v8a Re-Imagined.☆11Updated 5 years ago
- SDBox Mini for Amiga, compatible with the new updated card-detect firmware☆21Updated last year
- This is a Kernal Adapter/Switch for the Commodore C64, ASSY250469 (short board).☆30Updated 2 years ago
- ☆10Updated 3 years ago
- A 3d-printable Amiga PSU Enclosure for the Mean Well RT-50B Power Supply☆12Updated 5 years ago
- 65(c)02 to 7501/8501 converter☆18Updated 3 years ago
- 68000 Relocator with FLASH Kickstart☆31Updated 2 years ago
- MOS 6520 PIA / MOS 6522 VIA / MOS 6526/8520/8521 CIA replacement☆28Updated last week
- single 12V Power supply module for Amiga 500 computers☆29Updated 3 years ago
- Changes the orientation of a 68000 DIP CPU☆15Updated 5 years ago
- ☆23Updated 2 months ago
- A simple interface for standard PC Floppy Disk Drive and Amiga Computers☆27Updated 3 years ago
- A replica of the Prelude ZII sound card for the Amiga.☆34Updated last year
- This is a reliable and easy to build parallel User Port Adapter for the Commodore 1541/1541-II☆26Updated last year
- Hardware design of a (up to) 2MB cartridge for the Commodore 264 line of computers (Commodore 16, 116 and plus/4)☆22Updated last month
- This is a PCB based on the Steve White schematic. You just plug on the top of a RPI 3 and you have a fully working 1541 disk emulator :)☆18Updated 4 years ago
- Repository for retro computer cartridges☆27Updated 3 years ago
- An Adaptor for the Character ROM of the Commodore C64☆18Updated 3 years ago
- Adapter to fit the older 1MB Agnus to the A500+☆16Updated 3 years ago
- ☆13Updated 6 years ago
- C64 Stripefix Videobuffer transistor based and video buffer IC based☆12Updated 8 years ago