RetroNynjah / Amiga-500-ROM-AdapterLinks
Allows use of regular EPROMS on Amiga 500 Rev 5 boards
☆16Updated 4 years ago
Alternatives and similar repositories for Amiga-500-ROM-Adapter
Users that are interested in Amiga-500-ROM-Adapter are comparing it to the libraries listed below
Sorting:
- A PSU for the Commodore C64 and up to two 1541-II floppy disk drives☆24Updated 2 years ago
- This is a Kernal Adapter/Switch for the Commodore C64 long board☆17Updated 3 years ago
- Amiga 512kB memory expansion. Minimal cost efficient design.☆14Updated 5 years ago
- MOS8701 replacement module with a jumper to select NTSC or PAL having a dual-clock.☆11Updated 4 years ago
- Fancy Kickstart Switcher for A500-A600-A1200-A4000☆18Updated 9 months ago
- An Adaptor for the Character ROM of the Commodore C64☆18Updated 3 years ago
- Public KiCad Libraries from www.hackup.net☆11Updated last year
- Control Amiga add-on boards through mouse buttons☆26Updated 5 years ago
- This is a PCB based on the Steve White schematic. You just plug on the top of a RPI 3 and you have a fully working 1541 disk emulator :)☆18Updated 5 years ago
- Buffered IDE2CF adapter for Amiga 1200, TF1260 and others☆11Updated 2 months ago
- ☆12Updated 4 years ago
- This is a Kernal Adapter/Switch for the Commodore C64, ASSY250469 (short board).☆30Updated 3 years ago
- Hardware design of a (up to) 2MB cartridge for the Commodore 264 line of computers (Commodore 16, 116 and plus/4)☆27Updated 5 months ago
- Commodore VIC-20, Commodore 64, and Commodore Plus/4 Over-Voltage Protection☆10Updated 3 years ago
- 90 degree adapter for mounting a C64 cartridge vertically☆11Updated 5 months ago
- Various S-Video devices☆23Updated 2 years ago
- ☆13Updated 2 years ago
- SDBox Mini for Amiga, compatible with the new updated card-detect firmware☆24Updated last year
- An internal Gotek mounting bracket for Amiga 500 designed in DesignSpark V4☆15Updated last year
- ☆25Updated 5 months ago
- 8MB FastRAM and BSC-AT-Bus IDE controller for Amiga 500☆26Updated 11 months ago
- ☆17Updated 4 years ago
- ☆11Updated 3 years ago
- A 1MB chip RAM expansion for the A500+☆29Updated 5 years ago
- Adapter to fit the older 1MB Agnus to the A500+☆18Updated 3 years ago
- Schemtics and PCB Layout for the Amiga 2000 Rev6☆11Updated 3 years ago
- Adapter for using Sega Mega Drive/Genesis controllers on a C64, with builtin port switcher so no more cable switching!☆14Updated 5 years ago
- Wanted a joystick switcher for my Commodore 64, so I built one by adapting C64 Mega Switcher for use with Atari-style joysticks. Supports…☆20Updated 2 years ago
- ☆10Updated last year
- A case for the Versa64Cart☆27Updated 5 years ago