screwbreaker / OpenA1200RTCLinks
Open Hardware RTC module for the Amiga 1200.
☆24Updated 6 years ago
Alternatives and similar repositories for OpenA1200RTC
Users that are interested in OpenA1200RTC are comparing it to the libraries listed below
Sorting:
- 4 ATA/ATAPI IDE Interface for Commodore Amiga 1200 and Amiga 600 computers☆15Updated 5 years ago
- Amiga 500+ v8a Re-Imagined.☆11Updated 6 years ago
- A simple interface for standard PC Floppy Disk Drive and Amiga Computers☆28Updated 3 years ago
- Replace the old 44256 DRAM chips on your A500 with newer EDO memory☆2Updated 5 years ago
- single 12V Power supply module for Amiga 500 computers☆31Updated 4 years ago
- A remake of the RA5-512K expansion memory for the Amiga 500 made in diptrace☆20Updated 5 years ago
- The reverse engineered schematics for the Action Replay II/III for the Amiga. The eventual end goal of this project is to reimplement the…☆13Updated 2 years ago
- 8MB FastRAM and BSC-AT-Bus IDE controller for Amiga 500☆27Updated this week
- Replace the old 44256 DRAM chips on your A500 with newer SRAM memory☆4Updated 5 years ago
- Amiga 500 8MB FastRAM and IDE interface☆35Updated 11 months ago
- Simple SPI controller for Amiga 500 with support for SD-cards and Ethernet controller☆13Updated 2 years ago
- KiCad library files for Commodore Amiga related projects☆24Updated 4 years ago
- Mechanical keyboard for Amiga 500 and 1200, using Cherry MX compatible switches.☆50Updated 2 years ago
- A PSU for the Commodore C64 and up to two 1541-II floppy disk drives☆24Updated 2 years ago
- 68000 Relocator with FLASH Kickstart☆31Updated 2 years ago
- Improved design attempt for Amiga 500 in socket 68000 Accelerator, FastRAM and IDE Interface☆53Updated 11 months ago
- Control Amiga add-on boards through mouse buttons☆26Updated 5 years ago
- ☆11Updated 3 years ago
- A knockoff of the A1050 front mounted RAM Expansion for the Amiga 1000☆12Updated last year
- ReAmiga 3000TH by John 'Chucky' Hertell converted to KiCAD☆20Updated 4 years ago
- ☆13Updated 3 years ago
- STM32 Usb Based firmware microcontroller for any Amiga internal keyboard adapter☆38Updated last year
- This is a reliable and easy to build parallel User Port Adapter for the Commodore 1541/1541-II☆26Updated last year
- PCMCIA SRAM card project (Sakura) - rev 2.1.2019☆11Updated 6 years ago
- ☆26Updated last week
- A PLCC-84 plug adapter created out of PCBs☆27Updated 10 months ago
- This is a PCB based on the Steve White schematic. You just plug on the top of a RPI 3 and you have a fully working 1541 disk emulator :)☆18Updated 5 years ago
- Greaseweazle Projects☆14Updated 2 years ago
- ☆13Updated 2 years ago
- A case for the Versa64Cart☆27Updated 5 years ago