screwbreaker / ppa-pcmcia-sramLinks
PCMCIA SRAM card project (Sakura) - rev 2.1.2019
☆11Updated 5 years ago
Alternatives and similar repositories for ppa-pcmcia-sram
Users that are interested in ppa-pcmcia-sram are comparing it to the libraries listed below
Sorting:
- ☆11Updated 3 years ago
- A LAN/IDE solluntion with Clockport for the Amiga ZorroII/III Slot☆16Updated 5 years ago
- Miscellaneous PCB projects☆14Updated 3 years ago
- Amiga 500+ v8a Re-Imagined.☆11Updated 6 years ago
- Simple SPI controller for Amiga 500 with support for SD-cards and Ethernet controller☆13Updated 2 years ago
- A knockoff of the A1050 front mounted RAM Expansion for the Amiga 1000☆12Updated last year
- Changes the orientation of a 68000 DIP CPU☆15Updated 5 years ago
- Schemtics and PCB Layout for the Amiga 2000 Rev6☆11Updated 3 years ago
- A Pistorm CPU board replacement☆20Updated 6 months ago
- A replica of the Prelude ZII sound card for the Amiga.☆34Updated last year
- Here is a Picasso 4MB Flicker Fixed for Amiga 2000, 3000 and 4000☆14Updated last year
- The reverse engineered schematics for the Action Replay II/III for the Amiga. The eventual end goal of this project is to reimplement the…☆13Updated 2 years ago
- Amiga clock port to Raspberry Pi interface (alternate PCB layout)☆16Updated last year
- This is a Kernal Adapter/Switch for the Commodore C64 long board☆17Updated 3 years ago
- ReAmiga 3000TH by John 'Chucky' Hertell converted to KiCAD☆20Updated 4 years ago
- Replace the old 44256 DRAM chips on your A500 with newer SRAM memory☆3Updated 5 years ago
- Mechanical keyboard for the Amiga 2000/3000/4000.☆24Updated 2 years ago
- 65(c)02 to 7501/8501 converter☆18Updated 3 years ago
- A remake of the RA5-512K expansion memory for the Amiga 500 made in diptrace☆19Updated 5 years ago
- A project to clone the FDC controller Cart for C64☆13Updated 3 years ago
- A ReAgnus MegaAChip PCB that takes a Gowin FPGA with embedded PSRAM, a PLCC-84 plug and FET level shifters.☆28Updated 4 months ago
- Amiga IDE Boot Rom☆21Updated 7 years ago
- A case for the SukkoPera's openC64cart (8k and 16k)☆12Updated 5 years ago
- 4 ATA/ATAPI IDE Interface for Commodore Amiga 1200 and Amiga 600 computers☆15Updated 5 years ago
- Implementation of 8250 Complex Interface Adapter (CIA) in Verilog☆17Updated 3 years ago
- An Open source IDE driver for Amiga computers☆32Updated 2 weeks ago
- A flexible trapdoor extension for the AMIGA 500☆13Updated 4 years ago
- Inexpensive A500 hard disk interface☆27Updated last year
- An Adaptor for the Character ROM of the Commodore C64☆18Updated 3 years ago
- ☆13Updated 6 years ago