ryanm101 / ActionReplayAmigaLinks
The reverse engineered schematics for the Action Replay II/III for the Amiga. The eventual end goal of this project is to reimplement the PALs in FPGA or with modern components.
☆13Updated 2 years ago
Alternatives and similar repositories for ActionReplayAmiga
Users that are interested in ActionReplayAmiga are comparing it to the libraries listed below
Sorting:
- ReAmiga 3000TH by John 'Chucky' Hertell converted to KiCAD☆20Updated 5 years ago
- Miscellaneous PCB projects☆16Updated 3 years ago
- Amiga 500+ v8a Re-Imagined.☆11Updated 6 years ago
- ☆12Updated 4 years ago
- A knockoff of the A1050 front mounted RAM Expansion for the Amiga 1000☆12Updated last year
- Amiga 500 8MB FastRAM and IDE interface☆36Updated last year
- A LAN/IDE solluntion with Clockport for the Amiga ZorroII/III Slot☆16Updated 6 years ago
- A simple interface for standard PC Floppy Disk Drive and Amiga Computers☆30Updated 3 years ago
- Simple SPI controller for Amiga 500 with support for SD-cards and Ethernet controller☆13Updated 3 years ago
- Open Hardware RTC module for the Amiga 1200.☆26Updated 6 years ago
- PCMCIA SRAM card project (Sakura) - rev 2.1.2019☆11Updated 6 years ago
- 90 degree adapter for mounting a C64 cartridge vertically☆11Updated 11 months ago
- ☆15Updated last year
- Amiga 500 Side Expansion Slot CPU Relocator with Flash Kickstart☆12Updated 4 years ago
- GVP-Compatible 64-pin 4MB SIMM☆30Updated 9 months ago
- ☆15Updated 4 years ago
- 68000 Relocator with FLASH Kickstart☆32Updated 2 months ago
- Various S-Video devices☆23Updated 2 years ago
- single 12V Power supply module for Amiga 500 computers☆31Updated 4 years ago
- A PSU for the Commodore C64 and up to two 1541-II floppy disk drives☆24Updated 2 years ago
- Here is a Picasso 4MB Flicker Fixed for Amiga 2000, 3000 and 4000☆14Updated 2 years ago
- This is a reliable and easy to build parallel User Port Adapter for the Commodore 1541/1541-II☆27Updated last year
- RGBtoHDMI CPLD-adapter-board for A500.☆12Updated 2 years ago
- Schemtics and PCB Layout for the Amiga 2000 Rev6☆14Updated 4 years ago
- An internal Gotek mounting bracket for Amiga 500 designed in DesignSpark V4☆16Updated 2 years ago
- ☆15Updated 7 years ago
- Amiga 512kB memory expansion. Minimal cost efficient design.☆14Updated 5 years ago
- This is a Kernal Adapter/Switch for the Commodore C64 long board☆17Updated 3 years ago
- A replica of the Prelude ZII sound card for the Amiga.☆35Updated 2 years ago
- Adapter to allow the use of the A500+/A600 Agnus (390544 8375 ) in an Amiga A3000☆18Updated 3 years ago