sparkfun / OBD-II_UARTLinks
A board that provides a serial interface with a vehicle's OBD-II bus.
☆81Updated 5 years ago
Alternatives and similar repositories for OBD-II_UART
Users that are interested in OBD-II_UART are comparing it to the libraries listed below
Sorting:
- Eagle CAD files for CANBus Triple Hardware☆57Updated 8 years ago
- Multiplatform Arduino library for supporting the native CAN controller on Due (SAM3X) and Teensy 3.1 (K2X) as well as MCP2515 through SPI☆95Updated 6 years ago
- ☆83Updated last year
- Bluetooth ODB-2 Adapter based on the STN1110☆43Updated 8 years ago
- A reverse engineering tool for systems based on CAN bus communications☆82Updated 4 years ago
- Open Source CAN bus Analyser and Simulation Software☆62Updated 2 months ago
- This is a small example sketch that simulates a cars ecu☆79Updated 4 years ago
- OBD-II CAN adapter for Particle Electron, Photon, and RedBear Duo☆106Updated 6 years ago
- ELM327-based OBD-II Bluetooth interface☆80Updated 5 years ago
- Arduino library for CAN on Teensy 3.1, 3.2, 3.5, and 3.6☆118Updated 3 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆70Updated 6 years ago
- A fork of CANard with various tweaks and improvements implemented☆49Updated 6 years ago
- Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.☆44Updated 5 years ago
- Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards☆102Updated 6 years ago
- Library to facilitate CAN functionality with the onboard MCP2515 CAN controller☆46Updated 7 years ago
- Arduino library for CAN on Teensy 3.1☆159Updated 6 years ago
- Android CAN client☆61Updated 7 years ago
- An Arduino based LINBUS stack and signal interceptor/injector.☆192Updated 6 years ago
- Designs for the Macchina M2☆93Updated 4 years ago
- Open Source Hardware Schematics for OpenXC Vehicle Interface☆39Updated 4 years ago
- Software for the CAN bus simulator on the Rasperry Pi☆67Updated 9 years ago
- OpenXC-compatible firmware for PIC32 and LPC1768☆204Updated 2 years ago
- Hardware for a CAN to USB bridge.☆57Updated 6 years ago
- ☆30Updated 8 years ago
- CAN driver project for the Espressif ESP32☆27Updated 4 years ago
- AT90CAN Support for Arduino☆22Updated 10 years ago
- Simple GUI for USBtin (USB to CAN interface)☆42Updated 4 years ago
- Firmware for the CANalyze hardware.☆68Updated last year
- An Arduino sketch to read data from a CAN bus☆96Updated 6 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆55Updated 4 years ago