HerrRiebmann / KDS2BluetoothLinks
Kawasaki Diagnostic Service Reader via Bluetooth
☆167Updated 2 years ago
Alternatives and similar repositories for KDS2Bluetooth
Users that are interested in KDS2Bluetooth are comparing it to the libraries listed below
Sorting:
- The KWP2000 is a communications protocol used for on-board vehicle diagnostics systems (OBD) by Suzuki (SDS), Kawasaki (KDS), Yamaha (YDS…☆261Updated 2 years ago
- A class to read an ISO 9141-2 port found in car diagnostic OBD-II ports.☆287Updated 4 months ago
- CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)☆303Updated 6 months ago
- Arduino sketch for CAN-BUS adapter☆105Updated 9 years ago
- An open source TCM for Daimlers 722.6 gearbox. Resource repository☆116Updated 9 months ago
- CanHacker (lawicel) CAN adapter on Arduino + MCP2515☆428Updated last year
- Open-source OBD-II emulator based on an ESP32 + CAN transceiver IC, controllable via WiFi through a simple web UI (or via API)☆449Updated 7 years ago
- Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. C…☆321Updated last year
- ELM327-based OBD-II Bluetooth interface☆80Updated 5 years ago
- External information display for modern Honda motorcycles, using the HDS (diagnostic) connector on the ECU and other sensors (e.g GPS, DH…☆106Updated 2 years ago
- An Arduino sketch for controlling a Bosch LSU 4.9 Wideband Lambda sensor with minimal parts☆79Updated 11 years ago
- Open source project for W211/W219 W203/W209 Mercs - bluetooth audio control and more!☆146Updated 5 years ago
- An Arduino based LINBUS stack and signal interceptor/injector.☆192Updated 6 years ago
- RealDash examples and technical materials☆145Updated this week
- Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and responde to PID requests☆64Updated last year
- Device based on Arduino to play with VAG KWP1281☆120Updated 6 years ago
- ☆65Updated last year
- An Arduino sketch to read data from a CAN bus☆96Updated 6 years ago
- Arduino firmware for Sardine CAN (Open Source J2534 device)☆83Updated 10 years ago
- ☆25Updated 8 years ago
- AVR alternative to vwcdpic HW+SW☆59Updated 3 years ago
- ELM327 based vehicle's CAN bus sniffer☆64Updated 6 years ago
- Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter☆112Updated 4 years ago
- ☆42Updated 3 years ago
- Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'☆57Updated 5 years ago
- Android CAN client☆61Updated 7 years ago
- Arduino ESP32 library supporting the on-chip CAN module☆337Updated 4 months ago
- Volvo LIN bus reader☆93Updated 4 years ago
- Object oriented canbus library for Arduino Due compatible boards☆258Updated 2 years ago
- Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.☆40Updated 3 months ago