hongselectronics / TPM2.0-ModuleLinks
A Trusted Platform Module (TPM) breakout board and module compatible with most modern PC motherboards that have a Low Pin Count (LPC) Bus, usually a 20 pin header.
☆17Updated 4 years ago
Alternatives and similar repositories for TPM2.0-Module
Users that are interested in TPM2.0-Module are comparing it to the libraries listed below
Sorting:
- Analog RGB 15Khz to VGA 31Khz in FGPA☆48Updated 9 years ago
- PCMCIA SRAM card project (Sakura) - revised for 2018 & ported to kicad☆23Updated 6 years ago
- PAL brute forcing using closed loop feedback w/ open-tl866☆24Updated 3 years ago
- ☆97Updated 3 years ago
- Code to support porting MiST cores to other boards.☆46Updated 3 months ago
- Drop-in replacements for metal can and half can style crystal oscillators☆42Updated 5 years ago
- Amiga 2000 revision 6.2 motherboard re-done in KiCAD. WARNING: stability issue with Wicher 500i, could be noise related from accelerato…☆32Updated 2 years ago
- Adapter to program EPROMs with more than 40 Pins on the popular TL866 universal programmer☆44Updated 7 years ago
- Open Programming Firmware for the TL866A Programmer.☆135Updated 2 years ago
- PCMCIA SRAM card project (Sakura)☆44Updated 6 years ago
- A set of scripts used to assist reverse engineering of old-school Programmable Array Logic devices.☆73Updated 5 years ago
- A CPLD implementation of the classic 82S100/82S101 as used in for example C64☆40Updated 5 years ago
- ☆81Updated 4 years ago
- MDA/CGA/EGA to VGA FPGA Converter V2.00☆65Updated 6 years ago
- Mirror of software for use with XGecu and Autoelectric's line of chip programmers (TL866A, TL866CS, TL866II Plus, T56)☆14Updated 2 years ago
- Drop-In replacement for Dallas DS12887 RTC module☆48Updated 3 years ago
- STM32-based USB to Floppy-Disk Drive (FDD) Adapter☆38Updated 4 years ago
- A board outline and pad connections for 72-pin SIMM memory.☆26Updated 2 years ago
- ZX FDD Emulator by EvgenRU☆11Updated 7 years ago
- This repository contains the KiCad files and the gerber files for the DuPAL boards.☆51Updated 5 months ago
- ☆12Updated 10 months ago
- PCB design for the pal dumper created by Charles MacDonald☆20Updated 8 years ago
- Logic chip tester including tri-state☆22Updated 5 years ago
- Remote control Amiga via mouse port and Arduino / Use other machine's (USB) mouse as Amiga mouse☆22Updated 10 years ago
- Firmware for a converter from USB keyboard to PS/2 computer☆60Updated 3 years ago
- A microprocessed RGB to HDMI Converter with USB capture☆104Updated last year
- RGBtoHDMI Projects☆45Updated 3 years ago
- This is a modified version of the Graphics Gremlin ISA CGA/MDA graphics card to include a HDMI port.☆55Updated 7 months ago
- Spins of Grant Searle's MultiComp project on various hardware☆72Updated 2 years ago
- Sidewinder FPGA☆26Updated 5 years ago