abzman / intellivision-t-cardLinks
replica of the t-card development cart for the intellivision that takes standard ROMs
☆11Updated 10 months ago
Alternatives and similar repositories for intellivision-t-card
Users that are interested in intellivision-t-card are comparing it to the libraries listed below
Sorting:
- Miscellaneous PCB projects☆16Updated 3 years ago
- The reverse engineered schematics for the Action Replay II/III for the Amiga. The eventual end goal of this project is to reimplement the…☆13Updated 2 years ago
- PCMCIA SRAM card project (Sakura) - rev 2.1.2019☆11Updated 6 years ago
- Simple SPI controller for Amiga 500 with support for SD-cards and Ethernet controller☆13Updated 2 years ago
- Mini Floppy Emulator based on gotek.☆29Updated 4 years ago
- A 3d-printable Amiga PSU Enclosure for the Mean Well RT-50B Power Supply☆13Updated 6 years ago
- A PSU for the Commodore C64 and up to two 1541-II floppy disk drives☆24Updated 2 years ago
- 68000 Relocator with FLASH Kickstart☆32Updated 2 weeks ago
- Amiga 500 Side Expansion Slot CPU Relocator with Flash Kickstart☆12Updated 4 years ago
- Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.☆16Updated 7 months ago
- Amiga 500+ v8a Re-Imagined.☆11Updated 6 years ago
- A remake of the RA5-512K expansion memory for the Amiga 500 made in diptrace☆20Updated 6 years ago
- Amiga 500 8MB FastRAM and IDE interface☆35Updated last year
- Greaseweazle Projects☆16Updated 2 years ago
- Open Hardware RTC module for the Amiga 1200.☆25Updated 6 years ago
- single 12V Power supply module for Amiga 500 computers☆31Updated 4 years ago
- Inexpensive A500 hard disk interface☆27Updated last year
- A knockoff of the A1050 front mounted RAM Expansion for the Amiga 1000☆12Updated last year
- An internal Gotek mounting bracket for Amiga 500 designed in DesignSpark V4☆15Updated last year
- 8MB FastRAM and BSC-AT-Bus IDE controller for Amiga 500☆36Updated 4 months ago
- Replace 82s126/82s129/82s131 PROMs with (E)EPROMs☆14Updated last year
- ☆12Updated 4 years ago
- An internal WiFi using ESP32 microcontroller for Commodore computers (C64, C128) with level translators to a parallel bus interface so it…☆14Updated 5 years ago
- Efficient Commodore 64 power supply with overvoltage + overcurrent protection☆48Updated 6 years ago
- ReAmiga 3000TH by John 'Chucky' Hertell converted to KiCAD☆20Updated 4 years ago
- A LAN/IDE solluntion with Clockport for the Amiga ZorroII/III Slot☆16Updated 6 years ago
- 65(c)02 to 7501/8501 converter☆18Updated 3 years ago
- This is a reliable and easy to build parallel User Port Adapter for the Commodore 1541/1541-II☆27Updated last year
- Improved design attempt for Amiga 500 in socket 68000 Accelerator, FastRAM and IDE Interface☆53Updated 3 months ago
- A simple interface for standard PC Floppy Disk Drive and Amiga Computers☆29Updated 3 years ago