hkt999 / noza_osLinks
A tiny preemptive microkernel for rp2040 multicore processor
☆17Updated 3 weeks ago
Alternatives and similar repositories for noza_os
Users that are interested in noza_os are comparing it to the libraries listed below
Sorting:
- ch365/ch367/ch368 PCI/PCIE driver, application library and demo.☆24Updated 2 years ago
- PCB combining Raspberry Pi Pico and iCE40 FPGA☆31Updated last year
- ☆43Updated 4 years ago
- XMODEM with binary mode and 1K option and a sample YMODEM implementation.☆36Updated 5 years ago
- OK:iCE40Pro, based on iCE40up5k FPGA Core, is an Open Source Educational FPGA GamePad Console.☆15Updated 2 years ago
- EDA Tools: Xilinx ISE 14.7 Dockerfile☆21Updated 3 years ago
- Simple demo firmware for the RISC-V GD32VF103☆29Updated 5 years ago
- Playground of RaspberryPi baremetal (V3D, HDMI Audio, DMA, DWC2 USBHost, UART, Framebuffer)☆42Updated 3 years ago
- 8086 PC (x86) emulator for STM32F429 MCU☆33Updated 2 years ago
- Opensource embedded controller firmware for sipeed boards.☆44Updated 6 years ago
- A serial text terminal written in Verilog for Tang SiPeed Primer FPGA☆15Updated 3 years ago
- PicoRV32 RISC-V project for Tang Nano 20K FPGA development board☆33Updated last year
- Opensource toolchain for Lattice and Gowin FPGA☆25Updated last year
- 100Mbit/sec RMII interface for Raspberry Pi Pico☆14Updated 8 months ago
- Port TCC (Tiny C Compiler) to support Risc-V 32 targets (specifically for the ESP32-C3). This project is a work-in-progress and is not cu…☆73Updated 2 months ago
- A very simple RISC-V ISA emulator.☆38Updated 4 years ago
- urjtag from upstream on sourceforge http://sourceforge.net/projects/urjtag/☆30Updated last year
- HDMI-VGA output sample for Tang-NANO☆24Updated 5 years ago
- ☆41Updated 4 years ago
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆55Updated 3 years ago
- USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569☆27Updated 2 years ago
- Lichee-Nano-Doc-en☆31Updated 5 years ago
- An Arduino UNO compatible implementation for the iCE40 FPGAs☆20Updated 5 years ago
- Code examples for Sipeed Tang Nano 9K FPGA board including HDMI 720p and PSRAM controller usage.☆18Updated 3 years ago
- STM32 target playground for spiffs☆17Updated 9 years ago
- Soft low-speed USB host for ARM☆13Updated 2 years ago
- Altera USB-Blaster-compatible programmer on Raspberry Pi Pico☆21Updated last year
- Bare-metal programming on RP2350 dual-core ARM Cortex-m33/RISC-V Hazard3 (non-SDK)☆21Updated 6 months ago
- USB PD cc pin monitor implemented in a Tang Nano 9K FPGA.☆19Updated last year
- Small hobby computer based on Allwinner's F1C100S (F1C200S) processor☆25Updated 2 years ago