Alternatives and similar repositories for core

Users that are interested in core are comparing it to the libraries listed below

• Paciente8159 / uCNC
  µCNC - Universal CNC firmware for microcontrollers
  ☆405Updated this week
• terjeio / grblHAL
  This repo has moved to a new home https://github.com/grblHAL
  ☆230Updated last year
• terjeio / ioSender
  A GCode Sender for Grbl and grblHAL written in C# (Windows only).
  ☆263Updated last month
• Schildkroet / Candle2
  GRBL control interface in Qt.
  ☆224Updated last month
• bdring / 6-Pack_CNC_Controller
  ☆318Updated 2 years ago
• robomechs / 6-AXIS-USBCNC-GRBL
  This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl
  ☆218Updated 5 years ago
• Schildkroet / GRBL-Advanced
  Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411RE / ST…
  ☆298Updated last year
• thomast777 / grbl32
  GRBL 1.1f CNC Controller forked/ported to STM32 ARM : STM32F103 and STM32F407
  ☆215Updated 5 years ago
• Duet3D / Duet-2-Hardware
  The KiCAD source for the Duet 3d printer controller see www.duet3d.com
  ☆257Updated last year
• gnea / grbl-Mega
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Me…
  ☆514Updated 2 years ago
• scottalford75 / Remora
  Remora is a free, opensource LinuxCNC component and Programmable Realtime Unit (PRU) firmware to allow LPC176x and STM32F4 micro-controll…
  ☆164Updated 5 months ago
• makerbase-mks / MKS-DLC32
  MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equ…
  ☆415Updated 3 months ago
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆125Updated last month
• fra589 / grbl-Mega-5X
  5/6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C tha…
  ☆376Updated last year
• grblHAL / drivers
  Driver overview
  ☆38Updated last month
• teemuatlut / TMCStepper
  ☆581Updated last year
• Sienci-Labs / gsender
  Connect to and control grbl and grblHAL-based CNCs with ease
  ☆286Updated this week
• synthetos / g2
  g2core - The Next Generation
  ☆664Updated 2 years ago
• grblHAL / STM32F4xx
  grblHAL driver for ST STM32F4xx (Nucleo-64, Blackpill)
  ☆127Updated 2 weeks ago
• grblHAL / iMXRT1062
  grblHAL driver for NXP iMXRT1062 (Teensy 4.x)
  ☆55Updated 2 weeks ago
• grblHAL / ESP32
  grblHAL driver for ESP32
  ☆118Updated 2 weeks ago
• usbcnc / grbl
  This is a port of GRBL 1.1 to STM32F103 target
  ☆213Updated 6 years ago
• mstrens / grbl_controller_esp32
  grbl controller for esp32
  ☆202Updated 2 years ago
• OpenBuilds / OpenBuilds-CONTROL
  OpenBuilds CONTROL: Download from https://software.openbuilds.com
  ☆234Updated 6 months ago
• watterott / SilentStepStick
  Stepper Motor Driver based on a Trinamic TMC2100 / TMC2130 / TMC2208 / TMC2209 / TMC5160.
  ☆397Updated 3 years ago
• Misfittech / nano_stepper
  Stepper feedback controller
  ☆443Updated last year
• Stutchbury / Manualmatic-Pendant
  The Manualmatic Pendant for LinuxCNC
  ☆60Updated 2 months ago
• makerbase-mks / MKS-DLC
  MKS DLC support grbl firmware, can use Laser mode and CNC mode,support connect MKS TFT24/32/35 and TFT_CNC firmware support lasering and …
  ☆103Updated 3 years ago
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆179Updated 3 years ago
• pvico / grbl32
  CNC controller running on the STM32F103 "Blue Pill" board, build and flash on Mac/Linux
  ☆71Updated 4 years ago