Alternatives and similar repositories for Candle2

Users that are interested in Candle2 are comparing it to the libraries listed below

• Schildkroet / GRBL-Advanced
  Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411RE / ST…
  ☆298Updated last year
• robomechs / 6-AXIS-USBCNC-GRBL
  This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl
  ☆218Updated 5 years ago
• terjeio / grblHAL
  This repo has moved to a new home https://github.com/grblHAL
  ☆230Updated last year
• terjeio / ioSender
  A GCode Sender for Grbl and grblHAL written in C# (Windows only).
  ☆263Updated last month
• thomast777 / grbl32
  GRBL 1.1f CNC Controller forked/ported to STM32 ARM : STM32F103 and STM32F407
  ☆215Updated 5 years ago
• Paciente8159 / uCNC
  µCNC - Universal CNC firmware for microcontrollers
  ☆405Updated last week
• grblHAL / core
  grblHAL core code and master Wiki
  ☆447Updated this week
• mstrens / grbl_controller_esp32
  grbl controller for esp32
  ☆202Updated 2 years ago
• zeevy / grblcontroller
  Compact android mobile application for gcode streaming and controlling a cnc machine with grbl firmware
  ☆215Updated last year
• grblHAL / STM32F4xx
  grblHAL driver for ST STM32F4xx (Nucleo-64, Blackpill)
  ☆127Updated 2 weeks ago
• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆81Updated last year
• grblHAL / ESP32
  grblHAL driver for ESP32
  ☆119Updated 2 weeks ago
• usbcnc / grbl
  This is a port of GRBL 1.1 to STM32F103 target
  ☆213Updated 6 years ago
• bdring / 6-Pack_CNC_Controller
  ☆318Updated 2 years ago
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆179Updated 3 years ago
• pvico / grbl32
  CNC controller running on the STM32F103 "Blue Pill" board, build and flash on Mac/Linux
  ☆71Updated 4 years ago
• Denvi / FlatCAM
  https://bitbucket.org/jpcgt/flatcam
  ☆104Updated 3 months ago
• wezhunter / ESP32_LinuxCNC_MotionController_RealTime
  ESP32 hardware based real-time LinuxCNC motion controller
  ☆51Updated last year
• gnea / grbl-Mega
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Me…
  ☆514Updated 2 years ago
• OpenBuilds / OpenBuilds-CONTROL
  OpenBuilds CONTROL: Download from https://software.openbuilds.com
  ☆234Updated 6 months ago
• martin2250 / OpenCNCPilot
  autolevelling gcode-sender for grbl
  ☆409Updated 7 months ago
• gnea / grbl-LPC
  ☆76Updated 3 years ago
• makerbase-mks / MKS-DLC
  MKS DLC support grbl firmware, can use Laser mode and CNC mode,support connect MKS TFT24/32/35 and TFT_CNC firmware support lasering and …
  ☆103Updated 3 years ago
• dungjk / grbl-stm32
  An open source, embedded, high performance g-code-parser and CNC milling controller. This is a port of GRBL 1.1 to STM32F10X target.
  ☆86Updated 3 years ago
• grblHAL / Simulator
  grblHAL drivers for simulation (Linux and Windows)
  ☆37Updated 2 weeks ago
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆125Updated last week
• mstrens / grbl_controller_stm32
  Grbl controller running on stm32F103
  ☆38Updated 6 years ago
• grblHAL / drivers
  Driver overview
  ☆38Updated last month
• scottalford75 / Remora
  Remora is a free, opensource LinuxCNC component and Programmable Realtime Unit (PRU) firmware to allow LPC176x and STM32F4 micro-controll…
  ☆164Updated 5 months ago
• mstrens / grbl_6axis_on_stm32
  grbl_6axis_on_stm32
  ☆60Updated 5 years ago