Alternatives and similar repositories for OpenTCS

Users that are interested in OpenTCS are comparing it to the libraries listed below

• fredcooke / FreeMS2
  Free and Open Source MegaSquirt 2 Firmware
  ☆18Updated 13 years ago
• darkspr1te / elm327_clone
  ELM327 firmware for pic18f25k80 chip from china clone OBD2 diag boxes
  ☆43Updated 8 years ago
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆33Updated 12 years ago
• jsphuebner / stm32-car
  Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
  ☆64Updated this week
• qnx425 / PIC18FXXK80-CAN-Bootloader
  CAN Bootloader for PIC18FXXK80 family devices
  ☆15Updated 6 years ago
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆31Updated last month
• pazi88 / 8Ch-EGT
  8Ch EGT sensor board to be used with aftermarket ECUs
  ☆35Updated last year
• waal70 / S60CAN
  Arduino CANBUS Volvo S60 DPF soot filter
  ☆26Updated 7 months ago
• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆67Updated 8 months ago
• collin80 / GEVCU
  Generalized Electric Vehicle Control Unit
  ☆117Updated 3 years ago
• fpoussin / MotoLink
  K-line/Serial/CAN interface and fuel mapper for motorcycles.
  ☆94Updated 5 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆74Updated 6 years ago
• saleae / can-analyzer
  Saleae Controller Area Network (CAN) Analyzer
  ☆25Updated 7 months ago
• collin80 / GEVCU6
  Generalized Vehicle Control Unit for version 6 boards
  ☆25Updated last year
• arturlangner / Open-OBD2-datalogger
  Plug-in datalogger that saves live engine data to SD card.
  ☆22Updated 7 years ago
• darkspr1te / J2534-pic
  *on hold * Implement J2534 interface with a cheep Chinese elm327 copy (pic18f25k80)
  ☆19Updated 7 years ago
• BretStateham / arduino-ecu-simulator
  Arduino ECU Simulator
  ☆21Updated 6 years ago
• macchina / m2-hardware
  Designs for the Macchina M2
  ☆98Updated 5 years ago
• MagnusThome / ESP32_OBD2_Emulator
  Replies to all OBD2 requests with dummy data
  ☆14Updated 2 years ago
• seishuku / teensycanbusdisplay
  Jetta TDI aux display
  ☆18Updated 6 years ago
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆84Updated this week
• roboterclubaachen / usb2can
  ☆51Updated 6 years ago
• kdschlosser / vector_dbc
  Vector CANdb++ file parser
  ☆24Updated 2 years ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆82Updated 5 years ago
• coniferconifer / ESP32-ECU-emulator
  ECU emulator by ESP32 with TJA1050 for OBD2 print test
  ☆63Updated last year
• autosportlabs / OBD2CAN
  Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.
  ☆46Updated 6 years ago
• AmesisProject / 001-Amesis-clean-solenoid
  project arduino to clean solenoid injector of engin car
  ☆26Updated 4 years ago
• martinhol221 / ISO14230-4-KWP
  Reading the K-line of the bus according to ISO 14230-4 KWP 10.4 Kbaud
  ☆27Updated 5 years ago
• sebi2k1 / openCanSuite
  ☆31Updated 8 years ago
• ElDominio / ETC_Control
  Arduino Nano based ETC controller implemented with working states
  ☆10Updated 7 years ago