Alternatives and similar repositories for stbridge

Users that are interested in stbridge are comparing it to the libraries listed below

• CANnectivity / cannectivity
  USB to CAN adapter firmware
  ☆69Updated 3 weeks ago
• phryniszak / strtt
  Segger RTT console using ST-link
  ☆55Updated 10 months ago
• walmis / stm32-slcan
  slCAN compatible firmware for STM32f103C8T6
  ☆69Updated 3 years ago
• bdmihai / st-bridge
  ☆10Updated last year
• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆41Updated last month
• ataradov / embedded-swd
  Embedded implementation of the SWD interface
  ☆78Updated 4 years ago
• firmwaremodules / stm32-secure-patching-bootloader
  Secure Patching Bootloader and Firmware Update System for STM32 MCUs
  ☆70Updated last year
• STMicroelectronics / stm32-mw-openbl
  Provides the Open Bootloader library, part of the STM32Cube MCU Component "middleware", for all STM32xx series.
  ☆209Updated 3 months ago
• darauble / lawicel-slcan
  Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate
  ☆29Updated 6 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆82Updated last month
• compuphase / Black-Magic-Probe-Book
  A guide plus associated utilities for the Black Magic Probe.
  ☆150Updated 6 months ago
• WeActStudio / WeActStudio.USB2CANFDV1
  USB2CANFDV1, 1500V ISO, 5Mbps Max
  ☆46Updated 9 months ago
• teslabs / spinner
  FOC Motor Control Firmware
  ☆84Updated last year
• STMicroelectronics / STM32_open_pin_data
  This repo provides all the information required for the pin and board configuration of products based on STM32 MCU.
  ☆66Updated 2 months ago
• minoseigenheer / SWD-over-USB-C
  Use SWD debugging over USB-C debug accessory mode
  ☆39Updated last year
• cortexm / pyswd
  Python SWD Debugging library for ST-Link/V2
  ☆65Updated 2 months ago
• pierremolinaro / canfd-plugin-for-saleae-logic-analyzer
  CANFD Plugin for Saleae Logic Analyzer
  ☆30Updated 8 months ago
• QuantumLeaps / Super-Simple-Tasker
  Event-driven, preemptive, priority-based, hardware RTOS for ARM Cortex-M.
  ☆187Updated 2 months ago
• jetperch / pyjoulescope_ui
  Joulescope graphical user interface
  ☆95Updated last week
• Fescron / universal-jlink-adapter
  20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well …
  ☆75Updated last month
• orbcode / orbtrace
  Debug and parallel trace hardware for CORTEX-M (FPGA + support code)
  ☆149Updated 3 weeks ago
• schilkp / Tonbandgeraet
  A small embedded systems tracer with support for bare-metal and FreeRTOS-based targets.
  ☆27Updated 3 weeks ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆47Updated 2 years ago
• normaldotcom / candleLight_fw
  gs_usb compatible firmware for candleLight, cantact and canable
  ☆69Updated 3 years ago
• Misaka0x2730 / RailLink
  Compact isolated version of J-Link v9.
  ☆122Updated 3 years ago
• davefiddes / c2000-inverter
  Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.
  ☆15Updated 2 years ago
• florisla / stm32loader
  Flash firmware to STM32 microcontrollers using Python.
  ☆118Updated 9 months ago
• rideskip / anchor
  ☆88Updated 2 years ago
• STMicroelectronics / STM32CubeL0
  STM32Cube MCU Full Package for the STM32L0 series - (HAL + LL Drivers, CMSIS Core, CMSIS Device, MW libraries plus a set of Projects runn…
  ☆114Updated last month
• Embetronicx / STM32-Bootloader
  STM32 Custom Bootloader from scratch
  ☆91Updated last year