Alternatives and similar repositories for svd_editor

Users that are interested in svd_editor are comparing it to the libraries listed below

• esynr3z / openocd-svd
  Standalone OpenOCD and CMSIS-SVD based peripheral register viewer written on Python
  ☆36Updated 7 years ago
• hydrausb3 / hydrausb3_fw
  HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…
  ☆89Updated 2 years ago
• VladimirDuan / CH55x-USB-Blaster
  USB-Blaster instance on CH55x MCU.
  ☆54Updated 6 years ago
• ultraembedded / usb2sniffer
  USB2Sniffer: High Speed USB 2.0 capture (for LambdaConcept USB2Sniffer hardware)
  ☆59Updated 5 years ago
• michahoiting / rv-link
  RV-Link: In application debugger for RISC-V micro-controllers, RISC-V emulator, running on RISC-V development boards (e.g. Sipeed Longan …
  ☆31Updated 5 years ago
• deanm1278 / FPGA_SWD
  fpga co-processor for faster SWD programming
  ☆17Updated 8 years ago
• cjacker / wchlinke-mode-switch
  Deprecated, use 'wlink' instead. Command line tool to switch WCH-LinkE modes between DAP and RV from host.
  ☆10Updated last year
• czietz / pico-usb-speed-check
  Raspberry Pi Pico USB speed check
  ☆17Updated 3 years ago
• lambdaconcept / usbsniffer
  Gateware for USB2Sniffer
  ☆30Updated 4 years ago
• sperner / OpenOCD-QtGUI
  Graphical frontend for OpenOCD - the Opensource On-Chip-Debugger for debugging and programming various Controllers & Processors - using t…
  ☆21Updated 11 years ago
• tomverbeure / bscan_tools
  Various JTAG boundary scan tools
  ☆36Updated 5 years ago
• ak-hard / usb-blaster-stm32
  Software JTAG probe running on stm32f103.
  ☆27Updated 5 years ago
• hydrausb3 / wch-ch569-serdes
  WCH CH569 SerDes Reverse Engineering
  ☆30Updated 3 years ago
• amaranth-farm / ch569-hspi-fpga
  Gateware to communicate with the high speed parallel interface (HSPI) of the CH569 with a FPGA
  ☆33Updated 3 years ago
• perehinik / Logic_Analyzer_PCB
  KiCad PCB project of Logic Analyzer
  ☆45Updated 5 years ago
• openwch / ch569
  SDK sch&layout reference design and datasheet documention
  ☆69Updated 2 years ago
• geky / pyDAPLink
  Cross-platform CMSIS-DAP access over USB in Python
  ☆14Updated 10 years ago
• Icenowy / USB-Blaster-GCC
  Port of https://github.com/eleqian/WiDSO/tree/master/MCU/USB-Blaster to GCC and "traditional" STM32F103C8T6 Bluepill board.
  ☆43Updated 6 years ago
• mithro / ixo-usb-jtag
  usb-jtag - Altera USB Blaster Emulation with a FX2
  ☆73Updated 3 months ago
• Memotech-Bill / Teensy_Blaster
  Altera "USB_Blaster" clone using Teensy 3.5 microcontroller
  ☆23Updated 5 years ago
• cortexm / pyswd
  Python SWD Debugging library for ST-Link/V2
  ☆72Updated 11 months ago
• vanbwodonk / ft2232hl-jtag-clone
  Digilent JTAG clone hardware + eeprom firmware (.bin)
  ☆72Updated 3 years ago
• kaidegit / CMSIS-DAPbyWCH
  a cheap CMSIS-DAP debugger by an WCH chip named CH549F
  ☆48Updated 5 years ago
• emeb / spi_fiend
  STM32F042-based USB to SPI device for programming iCE40 FPGAs
  ☆18Updated 3 years ago
• tinylabs / flexsoc_cm3
  A flexible SoC emulator for ARM Cortex-M3
  ☆14Updated 3 years ago
• emard / LibXSVF-ESP
  ESP32/8266 Arduino as (X)SVF JTAG programmer
  ☆49Updated 7 years ago
• rgwan / open-ec
  Opensource embedded controller firmware for sipeed boards.
  ☆44Updated 6 years ago
• hydrausb3 / wch-ch56x-bsp
  WCH CH56x BSP for HydraUSB3 v1 hardware
  ☆17Updated last year
• HonghongLu / CH554
  8051 microcontroller
  ☆40Updated 8 years ago
• blueskull / CH552-JTAG
  USB-JTAG Adapter Using CH552
  ☆70Updated 4 years ago