diodep / ch55x_esp
An USB to Serial bridge based on CH55x series MCU.
☆23Updated 8 months ago
Alternatives and similar repositories for ch55x_esp:
Users that are interested in ch55x_esp are comparing it to the libraries listed below
- USB-Blaster instance on CH55x MCU.☆48Updated 5 years ago
- CH552 Dual USB to Serial Bridge.☆77Updated 8 months ago
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆54Updated 3 years ago
- USB-JTAG Adapter Using CH552☆68Updated 3 years ago
- CH32V305 DAPLink - USB2.0 High Speed DAPLink firmware for the WCH-LinkE☆17Updated 8 months ago
- Opensource embedded controller firmware for sipeed boards.☆38Updated 6 years ago
- usb-jtag - Altera USB Blaster Emulation with a FX2☆70Updated 3 years ago
- AGM bitstream utilities and decoded files from Supra☆42Updated last year
- Tang-Nano-examples☆67Updated 3 years ago
- Documenting the Anlogic FPGA bit-stream format.☆86Updated 2 years ago
- ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.☆63Updated last year
- This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…☆17Updated 2 years ago
- CH55x USB to JTAG bridge☆131Updated last month
- ☆26Updated 5 years ago
- Port of https://github.com/eleqian/WiDSO/tree/master/MCU/USB-Blaster to GCC and "traditional" STM32F103C8T6 Bluepill board.☆43Updated 6 years ago
- A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)☆21Updated 3 years ago
- SDK sch&layout reference design and datasheet documention☆60Updated last year
- WCH CH569 SerDes Reverse Engineering☆26Updated 2 years ago
- Software JTAG probe running on stm32f103.☆24Updated 4 years ago
- Tiny tips for Colorlight i5 FPGA board☆57Updated 4 years ago
- ☆24Updated 4 years ago
- ECP5 FPGA in an "S7 Mini" form factor☆79Updated 3 years ago
- Open-source CH55x flashing tool, SDK....☆151Updated 2 years ago
- 8051 microcontroller☆40Updated 7 years ago
- iCE40 FPGA, SPI flash, and CMSIS-DAP SWD programmer☆69Updated 4 years ago
- Wi-Fi enabled XVC programmer/debugger based on ESP8266☆12Updated 9 years ago
- USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569☆26Updated 2 years ago
- Altera "USB_Blaster" clone using Teensy 3.5 microcontroller☆19Updated 4 years ago
- Example Makefile project for the CH32V307☆28Updated 3 years ago
- Gateware to communicate with the high speed parallel interface (HSPI) of the CH569 with a FPGA☆31Updated 2 years ago