dhrosa / ws2812-verilogLinks
This is a Verilog module to interface with WS2812-based LED strips.
☆25Updated 6 years ago
Alternatives and similar repositories for ws2812-verilog
Users that are interested in ws2812-verilog are comparing it to the libraries listed below
Sorting:
- Upduino v2 with the ice40 up5k FPGA demos☆82Updated 2 years ago
- Source code of MIPI DSI Bridge Published on https://www.circuitvalley.com☆114Updated last year
- Xilinx 7-series FTDI-FPGA interface through JTAG with 125 us roundtrip latency☆20Updated 6 years ago
- Open Source ZYNQ Board☆31Updated 10 years ago
- A collection of portable hardware modules☆27Updated 10 years ago
- Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs☆122Updated 4 years ago
- Xilinx Virtual Cable Daemon☆124Updated 10 months ago
- Using the TinyFPGA BX USB code in user designs☆51Updated 6 years ago
- USB Serial on the TinyFPGA BX☆139Updated 4 years ago
- Test code to talk from STM32 MCU over FSMC to SDRAM on ICE40 FPGA☆29Updated 9 years ago
- Wishbone controlled I2C controllers☆56Updated last year
- This is a guide for bringing up custom ZYNQ boards. It covers test sequence, test method, common error situations and code and project th…☆72Updated 8 years ago
- ☆39Updated 4 years ago
- Public examples of ICE40 HX8K examples using Icestorm☆110Updated 2 years ago
- FPGA dev board based on Lattice iCE40 8k☆76Updated 5 years ago
- A KiCad wizard to assist you in making footprints for chips having pins around the edges (SOICs, QFPs, etc.) and ball grid arrays (BGAs)☆37Updated 6 years ago
- open-source logic analyzer for FPGAs☆99Updated 7 years ago
- ☆34Updated 7 years ago
- A simple script to build open-source FPGA tools.☆54Updated 3 years ago
- ECP5 FPGA in an "S7 Mini" form factor☆89Updated 4 years ago
- Altium Designer libraries for ANSI/VITA 57 FPGA Mezzanine Card (FMC) Standard☆45Updated 4 years ago
- ESP8266 Xilinx Virtual Cable - wifi JTAG☆40Updated 4 years ago
- FPGArduino source☆70Updated 6 years ago
- FPGA development board made with KiCAD☆115Updated this week
- Low-cost (or free) programmer for TinyFPGA A-Series boards☆41Updated 3 years ago
- The base reference design for EBIT EBAZ4205 Zynq7010 board.☆70Updated 5 years ago
- FPGA gateware and pre-build bitstreams that expose SPI over JTAG. The protocol is implemented (among others) by openocd.☆57Updated 2 years ago
- micropython ESP32 programmer/flasher for ECP5 JTAG☆74Updated 3 months ago
- Basic ECP5 based GigE to SYZYGY interface.☆208Updated 2 years ago
- This repository contains small example designs that can be used with the open source icestorm flow.☆155Updated 4 years ago