Alternatives and similar repositories for pylt

Users that are interested in pylt are comparing it to the libraries listed below

• Galvant / gpibusb-firmware
  PIC firmware for GPIBUSB
  ☆53Updated 11 years ago
• elektronomikon / raspi_gpib_shield
  A GPIB shield for the raspberry pi
  ☆36Updated 3 years ago
• Argonne-National-Laboratory / PyGMI
  Open source graphical interface for taking generic measurements over GPIB, USB, ethernet, serial...
  ☆36Updated 5 years ago
• Galvant / gpibusb-documentation
  Documentation files for GPIBUSB
  ☆22Updated 11 years ago
• mathiashelsen / agipibi
  Agipibi - An Arduino to GPIB Interface
  ☆39Updated 12 years ago
• essele / yaugi
  Yet Another USB GPIB Interface
  ☆16Updated 6 years ago
• alexforencich / python-ivi
  A Python implementation of the Interchangeable Virtual Instrument standard.
  ☆55Updated 5 years ago
• Galvant / gpibusb-pcb
  PCB KiCAD project files
  ☆77Updated 11 years ago
• krtkl / open-source-schematics
  released krtkl schematics
  ☆58Updated 7 years ago
• Galvant / gpibusb-firmware-arm
  GPIB to USB adapter firmware for a Cortex M0 ARM microcontroller
  ☆34Updated 11 years ago
• lightside-instruments / gpib4pi
  ☆14Updated last year
• tivek / gpib_ctypes
  ☆14Updated 6 years ago
• udara28 / SDRAM_Controller
  Implementation of a SDRAM controller in MyHDL (http://www.myhdl.org/)
  ☆21Updated 10 years ago
• larsks / arduino-gpib
  ☆17Updated 9 years ago
• an-ven / graspib
  GPIB interface board for Raspberry Pi
  ☆13Updated 3 years ago
• OneAudio / WBLNA
  Wide Bandwidth low noise amplifier 20Hz-20MHz 20/40dB
  ☆11Updated 6 years ago
• erainstruments / erasynth-docs
  ERASynth Documentation
  ☆22Updated 5 years ago
• MegabytePhreak / scope-footswitch
  Oscilloscope to footswitch interface for run control using USBTMC
  ☆19Updated 5 years ago
• xesscorp / xess_fp_wizard
  A KiCad wizard to assist you in making footprints for chips having pins around the edges (SOICs, QFPs, etc.) and ball grid arrays (BGAs)
  ☆37Updated 6 years ago
• DavidLutton / LabToolkit
  Python module for instrument control and automation.
  ☆27Updated last year
• erichVK5 / translate2geda
  A utility for converting kicad (.mod, .lib), Eagle (.lbr), gerber (.gbr etc..), BXL (.bxl), IBIS (.ibs), symdef, LT-Spice (.asc), QUCS (.…
  ☆51Updated 2 years ago
• rambo / python-scpi
  Since all the other wrappers either require VISA binary or are not generic (and do not implement the device I need)
  ☆50Updated 3 weeks ago
• TAPR / TICC
  Sub-nanosecond time interval counter
  ☆45Updated last month
• mwelling / beagle-wire
  ICE40 FPGA Cape for Beaglebone
  ☆52Updated 5 years ago
• devbisme / CAT-Board
  The CAT Board is a Raspberry Pi HAT with a Lattice iCE40HX FPGA.
  ☆62Updated last year
• LachlanGunn / oic
  Open Instrument Control
  ☆54Updated 4 years ago
• zonca / python-qucs
  QUCS, (http://qucs.sf.net), is a powerful open-source circuit simulator, python-qucs is a Python package that allows to automate the proc…
  ☆24Updated 4 years ago
• whileman133 / fastZ
  Lumped-element impedance calculator and frequency-domain plotter.
  ☆55Updated last year
• alvieboy / ZPUino-HDL
  ZPUino HDL implementation
  ☆91Updated 7 years ago
• compuphase / KiCad-Librarian
  A library manager for KiCad, with a template-driven generation of symbols, footprints and 3D models.
  ☆43Updated 6 years ago