bareboat-necessities / bbn-wave-period-esp32Links
Estimate ocean wave height (or vessel heave), waves direction, and period from accelerations using IMU on esp32 using advanced Kalman filters
☆49Updated this week
Alternatives and similar repositories for bbn-wave-period-esp32
Users that are interested in bbn-wave-period-esp32 are comparing it to the libraries listed below
Sorting:
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆27Updated 4 years ago
- Inherited object for use NMEA2000 with ESP32 boards☆86Updated last year
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆42Updated 3 years ago
- Arduino library for the fastest and simplest communication with u-blox GPS modules☆148Updated last year
- ESP32 XBee UART Interface☆112Updated 2 years ago
- Arduino library for providing a convenient C++ interface for accessing OpenCyphal.☆74Updated 2 months ago
- nmea2000 gateway with ESP32☆85Updated 3 weeks ago
- Mahony Fusion Filter and Tilt compensated compass for ICM_20948☆60Updated 4 months ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆32Updated last year
- Arduino and CMake library for communicating with uBlox GPS receivers.☆113Updated last year
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆65Updated 3 years ago
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆25Updated 3 years ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆86Updated 3 years ago
- Material für den NMEA2000-Workshop.☆44Updated 3 months ago
- Sharing boat data across NMEA0183/NMEA2000/Bluetooth/IoT/MQTT with Android anchor watcher app and webpage.☆11Updated last year
- An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface☆90Updated 3 weeks ago
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆38Updated 2 years ago
- Digital compass acting as B&G Precision 9 based on ESP32 and CMPS14☆18Updated last year
- DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …☆41Updated 2 years ago
- SensESP32 Engine mointor code v2☆20Updated 11 months ago
- Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules☆147Updated 4 years ago
- A compact Arduino library to parse NMEA sentences.☆105Updated 3 years ago
- Library for handling NMEA0183 messages☆88Updated last year
- ☆56Updated 6 years ago
- AIS Encoder Add-On for NMEA2000/NMEA0183 Library of Timo Lappalainen☆13Updated last year
- ESP32 high-speed flash data logger for IMU (accelerometer+gyro+magnetometer), GPS, pressure sensor readings.☆21Updated 5 years ago
- Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.☆273Updated this week
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆67Updated 4 months ago
- DIY-Windsensor based on an ESP8266 with 3D printed enclosure☆12Updated 4 years ago
- Microcontroller files to access the Batmon battery monitor☆23Updated 2 weeks ago